Abstract:Controlled fabrication of metal nanospheres on nanotube tips for optical antennas is investigated experimentally. Resembling soap bubble blowing using a straw, the fabrication process is based on nanofluidic mass delivery at the attogram scale using metal-filled carbon nanotubes (m@CNTs). Two methods have been investigated including electron-beam-induced bubbling (EBIB) and electromigration-based bubbling (EMBB). EBIB involves the bombardment of an m@CNT with a high energy electron beam of a transmission electron microscope (TEM), with which the encapsulated metal is melted and flowed out from the nanotube, generating a metallic particle on a nanotube tip. In the case where the encapsulated materials inside the CNT have a higher melting point than what the beam energy can reach, EMBB is an optional process to apply. Experiments show that, under a low bias (2.0-2.5 V), nanoparticles can be formed on the nanotube tips. The final shape and crystallinity of the nanoparticles are determined by the cooling rate. Instant cooling occurs with a relatively large heat sink and causes the instant shaping of the solid deposit, which is typically similar to the shape of the molten state. With a smaller heat sink as a probe, it is possible to keep the deposit in a molten state. Instant cooling by separating the deposit from the probe can result in a perfect sphere. Surface and volume plasmons characterized with electron energy loss spectroscopy (EELS) prove that resonance occurs between a pair of as-fabricated spheres on the tip structures. Such spheres on pillars can serve as nano-optical antennas and will enable devices such as scanning near-field optical microscope (SNOM) probes, scanning anodes for field emitters, and single molecule detectors, which can find applications in bio-sensing, molecular detection, and high-resolution optical microscopy.

Fabrication of suspended metal–dielectric–metal plasmonic nanostructures

Mode Engineering In Large Arrays Of Coupled Plasmonic-Dielectric Nanoantennas

Tuning Optical Responses of Metallic Dipole Nanoantenna Using Graphene

Achieving Strong Field Enhancement and Light Absorption Simultaneously with Plasmonic Nanoantennas Exploiting Film-Coupled Triangular Nanodisks

Etching-free high-throughput intersectional nanofabrication of diverse optical nanoantennas for nanoscale light manipulation

Dispersive ground plane core-shell type optical monopole antennas fabricated with electron beam induced deposition

Mirror-coupled plasmonic nanostructures for enhanced in-plane magnetic dipole emission

Enhancing the Reception of Propagating Surface Plasmons Using a Nanoantenna

Fabrication and tuning of plasmonic optical nanoantennas around droplet epitaxy quantum dots by cathodoluminescence

Electrochemically Programmable Plasmonic Antennas

Tunable and scalable fabrication of plasmonic dimer arrays with sub-10 nm nanogaps by area-selective atomic layer deposition

Dielectric microsphere coupled to a plasmonic nanowire: A self-assembled hybrid optical antenna

Van der Waals Nanoantennas on Gold as Hosts for Hybrid Mie-Plasmonic Resonances

Metal-filled Carbon Nanotube Based Optical Nanoantennas: Bubbling, Reshaping, and in Situ Characterization

Tapered Dielectric Structure In Metal As A Wavelength-Selective Surface Plasmon Polariton Focuser

A Novel Fabrication Process of Nano-Cavity Coupled Plasmonic Structures for Colormetric Sensing

Tailoring Plasmon Lifetime in Suspended Nanoantenna Arrays for High-Performance Plasmon Sensing

Hybrid Graphene-Supported Aluminum Plasmonics

High-Power Impulse Magnetron Sputter Deposition of Ag on Self-Assembled Au Nanoparticle Arrays at Low-Temperature Dewetting Conditions

Novel route to fabrication of metal-sandwiched nanoscale tapered structures

Greatly Amplified Spontaneous Emission of Colloidal Quantum Dots Mediated by a Dielectric-Plasmonic Hybrid Nanoantenna