Abstract:In order to enhance the field effect mobility of poly(3-dodecylthiophene), Si nanowires were added to the poly(3-dodecylthiophene) solution prior to film formation. The Si nanowires were produced by the electroless metal deposition method which involved the etching of silicon wafers in aqueous hydrofluoric acid and silver nitrate solution. The observation of scanning electron microscopy proved the uniform Si nanowires were obtained. The blend film was treated with thermal annealing to form ordered microcrystalline structure by self-organization. The annealing effect was measured by X-ray diffraction and atomic force microscopy which showed the enhancing diffraction peak and ordered atomic force microscopy images after annealing films. In the bottom gated field effect transistors, the blend film of Si nanowires and poly(3-dodecylthiophene) were formed on the SiO2/Si substrate by spin coating. The surface of the SiO2/Si substrate was coated with hexamethyldisilazane to produce a hydrophobic surface. The thickness of the Au source/drain electrodes was 100 nm. The annealing blend films worked as the semiconducting layer, 300 nm SiO2 worked as the gate dielectric and Si worked as the gate electrode. The charge carrier mobility of poly(3-dodecylthiophene) thin films was 0.015 cm(2).V-1.s(-1) and the charge carrier mobility of blend films was up to 0.68 cm(2).V-1.s(-1). The remarkable increase in the field effect mobility over that of pristine poly(3-dodecylthiophene) film is due to the high conductivity of Si nanowires which act as fast conducting channel between the crystalline regions of the poly(3-dodecylthiophene) film. To confirm and enhance the field effect transistors properties, we used the electric-double-layer transistor based on the blend films in which ion gel worked as the gate dielectric instead of SiO2. Here, Au foil worked as the gate electrode to form a top-gated field effect transistors. The charge carrier mobility of blend films was found to be relatively higher (6.2 cm(2).V-1.s(-1)) when using ion gel as the dielectric layer.

Excellent Carrier Mobility of 0.24 Cm2/vs in Regioregular Poly(3-Hexylthiophene) Based Field-Effect Transistor by Employing Octadecyltrimethoxysilane Treated Gate Insulator

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Tunability of Mobility and Conductivity over Large Ranges in Poly(3,3'''-Didodecylquaterthiophene)/insulating Polymer Composites.

Influence Of The Dielectric And Of The Active Layer Doping On The Fet Mobility In Ppv-Based Devices

Controlling the Field-Effect Mobility of Regioregular Polythiophene by Changing the Molecular Weight

Intrinsic hole mobility and trapping in a regio-regular poly(thiophene)

Enhanced Mobility in C8-BTBT Field-effect Transistors with Iodine-doping

Poly(3-hexylthio) Thiophene Field-effect Transistor Device Performance: Impact of the Content of Hexylthio Side Chain on Backbone

Polymer Electrolyte Blend Gate Dielectrics for High-Performance Ultrathin Organic Transistors: Toward Favorable Polymer Blend Miscibility and Reliability

Enhanced Performance of Solution-Processed Regioregular Poly(3-Hexylthiophene) Thin-Film Transistors Using Planar Bottom-Contact Architecture

Clarifying the Dominant Role of Crystallinity and Molecular Orientation in Differently Processed Thin Films of Regioregular Poly(3-hexylthiophene)

Controllable Growth of P3HT Single-Crystal Films for Organic Field-Effect Transistors

Long-range polymer ordering by directional coating to remarkably enhance the charge carrier mobility in PCDTPT-based organic field-effect transistors

Controlled Orientation of Liquid-Crystalline Polythiophene Semiconductors for High-Performance Organic Thin-Film Transistors

Conjugated Polymer Controlled Morphology and Charge Transport of Small-Molecule Organic Semiconductors

Experimental Observation of Ultrahigh Mobility Anisotropy of Organic Semiconductors in the Two-Dimensional Limit

High-mobility, Air Stable Bottom-Contact N-Channel Thin Film Transistors Based on N,N′-ditridecyl Perylene Diimide

Field Effect Transistors Characteristics Based on Blends of Si Nanowires and Poly(3-dodecylthiophene)

Fabrication of flexible organic field effect transistors with high carrier mobility via sheath gas-assisted direct writing Poly(3-hexylthiophene) solution

Cocrystallization-Promoted Charge Mobility in All-Conjugated Diblock Copolymers for High-Performance Field-Effect Transistors

Carrier confinement for mobility enhancement in dual-gate organic thin-film transistors