Abstract:Bulk Mg-Cu-Y-Al alloys, prepared by casting into a wedge-shaped copper mold, have been studied in the as-prepared, the supercooled liquid, and the crystalline states. In the as-prepared state x-ray diffraction of sub-millimeter sized regions were performed using a focused x-ray beam. The phase composition of the cross section as well as of the surface of the wedge-shaped specimen was investigated as a function of position. The cooling history of the alloy was experimentally determined and compared to results of a control-volume finite-difference modelling study. The experimentally determined and the calculated cooling rates were correlated with the observed amorphous/crystalline structure. The transition from an amorphous to a crystalline state was followed by x-ray diffraction studies as a function of time at specific temperatures in the region between the glass transition and the crystallization temperature. Based on these results a temperature-time-phase diagram was constructed. The dependence of external pressure on the crystallisation temperature was investigated by in situ high-temperature and high- pressure x-ray powder diffraction by using synchrotron radiation. The investigations form the basis for a selection of the optimum temperature in the supercooled liquid region for performing deformation/shaping of the Mg-based alloys.

Bulk Glassy Cu-based Alloys with a Large Supercooled Liquid Region of 110 K

Glass-Forming Ability and Mechanical Properties of the Ternary Cu-Zr-Al and Quaternary Cu-Zr-Al-Ag Bulk Metallic Glasses

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

Cu-alloying Effect on Crystallization Kinetics of Ti41Zr25Be28Fe6 Bulk Metallic Glass

Crystallization Kinetics in Cu35ag15zr45al15 Metallic Glass

BULK AMORPHOUS Zr-Cu-Ni-Al-Hf-Ti ALLOYS WITH SUPERCOOLED LIQUID REGION OVER 140℃

Formation, Structure, and Crystallization Behavior of Cu-Based Bulk Glass-Forming Alloys

Solidification Microstructure in a Supercooled Binary Alloy

Mechanism of Ag and Al on improving the glass forming ability of CuZr-based alloys

Effect of Ag Content on Thermal Stability and Crystallization Behavior of Zr-Cu-Ni-Al-Ag Bulk Metallic Glass

Enhance the Thermal Stability and Glass Forming Ability of Al-based Metallic Glass by Ca Minor-Alloying

Alloying Strongly Influences the Structure, Dynamics, and Glass Forming Ability of Metallic Supercooled Liquids

Influence of Al and Ag on the Devitrification Behavior of a Cu-Zr Glassy Alloy

Devitrification Behavior and Glass-Forming Ability of Cu–Zr–Ag Alloys

Bulk Mg-Cu-Y-Al Alloys in the Amorphous, Supercooled Liquid and Crystalline States

Glass Forming Ability and Crystallization of Zr–Cu–Ag–Al–Be Bulk Metallic Glasses

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass

Effect of Ag addition on local structure of Cu–Zr glassy alloy

Structural Properties and Thermal Stability of Glassy (Zr<sub>.65</sub>Al<sub>.075</sub>Cu<sub>.175</sub>Ni<sub>.1</sub>)<sub>100-x</sub>Fe<sub>x</sub> (x≤20) Alloys Prepared by Mechanical Alloying