Abstract:Unraveling the microstructural heterogeneity is an important issue to understand the physical and mechanical properties of metallic glasses. Structural relaxation below the glass transition temperature Tg and cold rolling at ambient temperature are effective ways to tune the state within the potential energy landscape of metallic glasses, modifying the microstructural heterogeneity. With the help of nanoindentation technique, by scrutinizing the local reduced modulus and hardness of a typical Zr50Cu40Al10 metallic glasses in different energy states (from structural relaxed state to rejuvenated state), we demonstrate that the enhancement of microstructural heterogeneity plays an important role in tailoring the mechanical behavior. The internal friction coefficient is obtained by fitting the experimental load-displacement curves with finite element simulation. It is found that internal friction coefficient decreases with the increase of concentration of flow defects. The stress exponent obtained from the creep stage shows a strong dependence on the structural state of metallic glasses. Effects of structural relaxation and rejuvenation on the structural state are rationalized in terms of the relative flow defects concentration. Finally, the statistics of discrete displacement bursts during the deformation process were probed. We find that the displacement bursts behavior is sensitive to the structural energy state (microstructural heterogeneity). The displacement bursts phenomenon changes from obvious (relaxed state) to unapparent behaviors (rejuvenated state). By given a physical schematic, the correlation between the displacement bursts size and the shear band size in the local plastic zones is well established, which will lead to a deeper understanding of the rejuvenation-induced plasticity of metallic glasses.

Investigation of Mechanical Properties and Plastic Deformation Behavior of (ti45cu40zr10ni5)100−xalxmetallic Glasses by Nanoindentation

Effect of Sn and Al Additions on the Microstructure and Mechanical Properties of Amorphous Ti–Cu–Zr–Ni Alloys

Effect of Chemical Composition on the Thermoplastic Formability and Nanoindentation of Ti-Based Bulk Metallic Glasses

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Microscopic Hardness and Dynamic Mechanical Analysis of Rapidly Solidified Fe-based Amorphous Alloys

Effect of Ti Addition on the Glass Forming Ability, Crystallization, and Plasticity of (zr64.13cu15.75ni10.12al10)100−xtix Bulk Metallic Glasses

Serrated Plastic Flow During Nanoindentation in Nd-based Bulk Metallic Glasses

EFFECT OF Ti ADDITION ON THE GLASS--FORMING ABILITY OF (Zr0.59cu0.18ni0.13al0.10)100-Xtix ALLOYS

Nano-mechanical behavior of Ti(58-x)Cu42 Nix alloy investigated by nanoindentation

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Plastic Deformation Behaviors of Ni- and Zr-based Bulk Metallic Glasses Subjected to Nanoindentation

Effect of Ti addition on supercooled liquid region and glass forming ability of bulk amorphous Zr60Cu20Ni10-xAl10Tix alloys

The Effect of Al on the Elastic Properties of (cu0.56zr0.44)100−xalx Bulk Metallic Glasses

Effect of Al Addition on Glass Forming Ability of Cu-Based Bulk Metallic Glasses

Tensile Properties and Work-Hardening Behaviours of Al–Cu Alloys Modified by Al84Ni10La6metallic Glass

Mechanical properties of Nb based multiphase alloy studied by nanoindentation and atomic force microscopy

Effects of Minor Al Addition on the Glass-Forming Ability and Mechanical Properties of Cu-based Bulk Amorphous Alloy

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Bulk Glassy and Quasicrystalline (Zr65Al7.5Cu27.5)100−xTix Alloys and Their Mechanical Properties

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses