Abstract:Using electrochemical impedance spectroscopy (EIS) technique, the analyses of impedance models and the water uptake processes of epoxy-coated mild steels and LY12 aluminum alloys immersed in 3.5% (weight fraction) NaCl solution were studied. The fitting results using suitable electrical equivalent circuits (EEC) suggested that there were four kinds of impedance models in the course of immersion. In the initial period of immersion, an EEC containing the coating capacitance and the coating resistance was used to fit the EIS data. Along with the immersion time, the number of time-constant of impedance spectra for metal/coating systems increased, indicating that corrosion reaction took place. After a certain time's attacking of metal substrates, the diffusion process towards solution of corrosion products forming at the metal/coating interface might be restrained due to the presence of coating barrier, resulting in the appearance of diffusion elements. This diffusion did not act as an ideal Warburg behavior, leading to a deviation of dispersive number, n, from 0.5. After longer immersion times, the Cl− ions reached the surface of metal through the coating and participated in chemical reactions with corrosion products to form salt film on aluminum alloy surface. The formation of chloride ion-incorporation salt film resulted in the change of impedance spectrum characteristics. The studies revealed that the water transport in epoxy varnish coatings followed the Fickian diffusion law during the initial time of exposure to the testing solution. After immersion for a certain time, the water uptake reached saturation and the coating capacitance tended to a relatively steady value. According to the variation of coating capacitance with time, the water diffusion coefficient was deduced. The experimental results indicated that the water diffusion coefficients in epoxy coatings were slightly dependent on coating thickness and were to some extent influenced by substrate type. The similar surface chemical structures of epoxy coatings on different metals were found from the Fourier transform infrared spectroscopy (FT-IR)–attenuated total reflection (ATR) measurements. The glass transition temperature (Tg) of epoxy coatings prepared on different metal substrates before and after immersion was measured by using differential scanning calorimetry (DSC). Lower diffusion rate of water in Al alloy based epoxy films than that in steel based ones was interpreted by the higher absolute value and smaller decrease of Tg of organic coatings painted on the former substrate.

Comparison of the Failure Mechanisms of Silicone-Epoxy Hybrid Coatings on Type A3 Mild Steel and 2024 Al-alloy

Effect of tensile stress on the corrosion performance of silicone-epoxy coatings on 2024 Al-alloy

Studies of water transport behavior and impedance models of epoxy-coated metals in NaCl solution by EIS

Changes of Corrosion Electrochemical Behavior of Cerium Nitrate Doped GPTMS/TEOS Silane Hybrid Films with Immersion Time

Investigation of corrosion resistance and interfacial bonding properties of silver/silicone zinc-rich coating/substrate system in marine environment

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 1: Corrosion Performance and Interfacial Property

Effects of mechanical stress on protective properties of a marine coating on mild steel substrate

Improving the Corrosion Performance of Epoxy Coatings by Chemical Modification with Silane Monomers

Influence of Curing Agent Content on the Performance of Epoxy Coatings on Mild Steels

Silane-incorporated epoxy coatings on aluminum alloy (AA2024). Part 2: Mechanistic investigations

A comparative study of corrosion resistance of epoxy-based coating incorporated chitosan, silica and hybrid compound of chitosan/silica on mild steel

Corrosion Resistance of Epoxy Coatings Modified by Bis-Silane Prepolymer on Aluminum Alloy

Comparative Study on the Degradation of Two Self-Polishing Antifouling Coating Systems with Copper-Based Antifouling Agents

Study on the Failure Evolution Mechanism of Epoxy Coating in High-Concentration Ion Content Environment

Hybrid Organosilicon-Metal oxide Composites and their Corrosion Protection Performance for Mild Steel in 3.5% NaCl Solution

In-situ Polymerized Nanosilica/acrylic/epoxy Hybrid Coating: Preparation, Microstructure and Properties

Determination of Water Uptake and Diffusion of Cl− Ion in Epoxy Primer on Aluminum Alloys in NaCl Solution by Electrochemical Impedance Spectroscopy

Synthesis and characterization of silica–acrylic–epoxy hybrid coatings on 430 stainless steel

Eis Studies of Water Transport in Epoxy Coatings Coated on Ly12 Aluminum Alloys

Comparative Studies on the Deterioration Process of Organic Coatings under Immersed and Cyclic Wet-Dry Conditions by EIS

Evaluation of Mechanical Properties and Corrosion Protection Performance of Surface Modified Nano-alumina Encapsulated Epoxy Coated Mild Steel