Abstract:This study addresses the issue of enhancing the mechanical properties and adhesion of silicone antifouling coatings. In this paper, γ-aminopropyltriethoxysilane was used to pretreat bisphenol A epoxy resin to obtain epoxy-silicone prepolymer, which was then mixed with hydroxyl-terminated polydimethylsiloxane to obtain epoxy-modified silicone. It was cured with polyamide curing agent and dibutyltin dilaurate catalyst to form film, and a three-component epoxy-modified silicone coating was prepared. Fourier transform infrared (FTIR) spectroscopy was used to characterize its chemical structure. The effects of epoxy content on the surface properties, mechanical properties and antibacterial properties of the coatings were characterized by confocal laser scanning microscope (CLSM), contact angle measurements, tensile test and bacterial adhesion test. The results show that adding epoxy makes the adhesion of the coating at level 1 and the surface free energy of the coating was between 15–21 mJ/m2. When its content is less than 22.1 wt %, the coating is in a ductile material state. Once it is higher than 22.1 wt %, the coating was in a brittle material state. As the content increases, material’s hardness and fracture strength increases; elastic modulus decreases first and then increases, but bacteria removal rate decreases. The modification of the epoxy to silicone can effectively improve the adhesion and mechanical properties of the coating, while maintaining the characteristics of the low surface of the coating. It plays a positive role in improving the performance of silicone antifouling coatings.

Corrosion Resistance of Epoxy Coatings Modified by Bis-Silane Prepolymer on Aluminum Alloy

Improving the Corrosion Performance of Epoxy Coatings by Chemical Modification with Silane Monomers

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 1: Corrosion Performance and Interfacial Property

Water uptake of epoxy coatings modified with γ-APS silane monomer

CATHODICALLY ELECTROCHEMICAL-ASSISTED DEPOSITION AND PROTECTIVE PROPERTIES OF SILANE FILMS

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 2: a Study of Molecular Dynamics Simulation

Silane-incorporated epoxy coatings on aluminum alloy (AA2024). Part 1: Improved corrosion performance

Two-part epoxy-siloxane hybrid corrosion protection coatings for carbon steel

Silane-incorporated epoxy coatings on aluminum alloy (AA2024). Part 2: Mechanistic investigations

Preparation and Anticorrosive Performances of Polysiloxane-Modified Epoxy Coatings Based on Polyaminopropylmethylsiloxane-Containing Amine Curing Agent

Influence of Epoxy Content on the Properties and Marine Bacterial Adhesion of Epoxy Modified Silicone Coatings

Synthesis of Silane Functionalized LDH-Modified Nanopowders to Improve Compatibility and Enhance Corrosion Protection for Epoxy Coatings

Electrodeposited Silica Films Post-Treated with Organosilane Coupling Agent As the Pretreatment Layers of Organic Coating System

Preparation of Anticorrosive Epoxy Nanocomposite Coating Modified by Polyethyleneimine Nano-Alumina

Corrosion protection investigations of oxide‐silane composite coating on hot dip aluminized steel

Investigating the role of silane treatment in enhancing the anti-corrosion properties of MoS 2 particle-embedded epoxy coatings on steel

Preparation and Corrosion Resistance of ETEO Modified Graphene Oxide/Epoxy Resin Coating

Preparation of double linked waterborne epoxy resin coating using Titanium curing agent and aminopropyltriethoxysilane and its anticorrosive properties

Reducing the Water Absorption in Epoxy Coatings by Silane Monomer Incorporation

Hybrid epoxy–silane coatings for improved corrosion protection of Mg alloy

Improved corrosion performance of electrophoretic coatings by silane addition