Abstract:With the increased use of 2D materials for instrument minimization, research on recrystallization texture of cold-deformed metal foils during annealing becomes attractive, as the recrystallization process is also subjected to external constraints (biaxial thermal strain and surface energy) in addition to the microstructural factors. In this work, the orientation evolution of cold-rolled Cu foils (10 mu m thick) during heating was thoroughly investigated macroscopically by neutron and synchrotron radiation diffraction and microscopically by SEM-EBSD, combined with crystallographic analysis. The results showed that the foils underwent a transition from the cold-rolling texture to a recrystallization texture dominated by two rotated orientations, i.e., RD-rotated Cube and phi(2)-rotated Copper. The transition was screened by both intrinsic microstructural and extrinsic geometrical factors. The orientations of the nuclei were mainly inherited from the deformation orientations. Those with low Taylor factors (Cube, Goss and Brass) demonstrated size preference. The post-nucleation growth was affected by the biaxial thermal elastic constraint and surface energy. Due to their opposite effects, the orientations having moderate biaxial moduli and surface energy density (S, Copper, Brass and recrystallization components) survived, resulting in a mixed texture at the completion of recrystallization. The coherent Sigma 3 boundaries between the new components stabilized their growth through consuming the other crystals separated by random high-angle boundaries. The present results provide quantitative information on recrystallization texture and contribute to deepening the understanding of the recrystallization behavior of cold-worked metals.

Evolution of the Texture, Mechanical Properties, and Microstructure of Cu-2.7Be Alloys During Hot Cross-Rolling

Texture Evolution in an Al-Cu-Mg Alloy During Hot Rolling

Evolution of the Brass Texture in an Al-Cu-Mg Alloy During Hot Rolling

Microstructure and Mechanical Properties of Pure Copper Subjected to Skin Pass Asymmetric Rolling

Microstructure and Mechanical Evolution of Cu-2.7Be Sheets Via Annealing

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Microstructure and Bending Properties of Cu-Cr-Zr Alloy Subjected to Heat Treatment and Rolling

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Evolutions of the Microstructure, Texture and Mechanical Properties of a Cold Rolled Al-0.8Mg-0.8Si-0.66Cu-0.1Fe-0.12Cr Alloy

Effects of Different Modes of Hot Cross-Rolling in 7010 Aluminum Alloy: Part I. Evolution of Microstructure and Texture

Microstructure and Texture Evolution of Cu–Cr–Co–Ti Alloys During the Two-Stage Cryorolling

Effects of hot-rolling on secondary electron yield properties of Cu-2.7Be alloy

Texture Evolution in Hot-Rolled Al–Cu–Mg Sheets Using Orientation Streamline Approach and Texture Index

Strength-ductility synergy and anisotropy evolution of Cu-Be sheets with different Be contents

Effect of annealing on microstructure and tensile properties of cold-rolled Cu-2.7Be sheets

Microstructure and Texture Evolution in the Cryorolled CuZr Alloy

Evolution of Goss Texture in an Al–Cu–Mg Alloy During Cold Rolling

Effect of Warm Deformation on Precipitation and Mechanical Properties of a Cryorolled Al-Zn-Mg-Cu Sheet

Effects of Hot Rolling, Intermediate Annealing and Cold Rolling on Microstructure, Texture and Mechanical Properties of an Al-Mg-Si-Cu Alloy

Microstructure Evolution and Mechanical Properties of Cu-0.36Be-0.46Co Alloy Fabricated by Heating-Cooling Combined Mold Horizontal Continuous Casting During Cold Rolling

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating