Abstract:The present study investigated the aging precipitation behavior and mechanical, electrical properties of Cu–15Ni–8Sn alloy affected by cold rolling with different deformations. During cold rolling, the grain is elongated gradually along rolling direction with increasing deformation, simultaneously accompanied by the occurrence of a great deal of dislocations and deformation twins. During aging process, the coherent DO22 and L12 ordered phases precipitate successively from the matrix after 90% rolling deformation and aging treatment at 400 °C for 0.5 h with the orientation relationship of <math>(1¯10)DO22</math> // <math>(022¯)Cu</math>, <math>[111]DO22</math> // <math>[211]Cu</math>; <math>(11¯1¯)L12</math>// <math>(11¯1¯)Cu</math>, <math>[211]L12</math> // <math>[211]Cu</math>. However, discontinuous precipitation (DP) behavior is significantly accelerated by prior cold rolling. On the one hand, by revealing the underlying growth kinetics of DP, it can be found that the nucleation sites of DP transform from grain edges to grain boundaries gradually with increasing rolling deformation. On the other hand, the nucleation sites and nucleation rate of DP can be enhanced greatly with increasing dislocation density. Furthermore, the interlamellar spacing of DP slightly increases and the morphology transforms from lamellar structure to bush-like structure gradually with increasing rolling deformation. In addition, the hardness, tensile strength and electrical conductivity are obviously improved while the peak aging time greatly shortens with increasing rolling deformation. The optimal combination of properties with a hardness of 409 HV, a yield strength of 1256 MPa, and an electrical conductivity of 7.5 %IACS can be obtained in the sample with 90% rolling deformation after aging treatment at 400 °C for 0.5 h. The corresponding strengthening mechanism and conductive mechanism were discussed. It can be discovered that the precipitation strengthening, dislocation strengthening and solid solution strengthening are believed to be the main strengthening mechanisms to enhance the alloy strength.

Microstructure and Bending Properties of Cu-Cr-Zr Alloy Subjected to Heat Treatment and Rolling

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Tailoring the microstructure and mechanical properties of Cu-Fe alloy by varying the rolling path and rolling temperature

Effect of cryogenic rolling and multistage thermo-mechanical treatment on the microstructure and properties of the Cu-0.4Cr-0.39Zn-0.1Mg-0.07Zr alloy

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Microstructure and properties of Cu-Cr-Zr (Mg) alloys subjected to cryorolling and aging treatment

Work Hardening Behavior and Microstructure Evolution of a Cu-Ti-Cr-Mg Alloy during Room Temperature and Cryogenic Rolling

Microstructure evolution and mechanical properties of Al-Cu-Li alloys with different rolling schedules and subsequent artificial ageing heat treatment

Microstructure evolution and mechanical properties of Al−3.6Cu−1Li alloy via cryorolling and aging

Influences of Cold Rolling and Aging on Microstructure and Property of CuCrSn Alloy

Effects of Cold Rolling Reduction Rate on the Microstructure and Properties of Cu-1.16Ni-0.36Cr Alloy after Thermo-Mechanical Treatment

Effect of Rolling Process and Aging on the Microstructure and Properties of Cu-1.0Cr-0.1Zr Alloy

Microstructural evolution and mechanical property of Cu‐Cr‐Zr‐ZrB2 composites subjected to cryorolling and aging treatment

Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu–15Ni–8Sn alloy

Mechanical property enhancement and microstructure evolution of an Al-Cu-Li alloy via rolling at different temperatures

Effect of heat treatment on the microstructure and mechanical properties of cryogenic rolling 2195 Al–Cu–Li alloy

Effect of cold rolling on microstructure and mechanical properties of a Cu–Zn–Sn–Ni–Co–Si alloy for interconnecting devices

Tailoring the formability and planar anisotropy of Al-Mg-Si-Cu-Zn alloys via cross hot rolling and two-stage cold rolling

Microstructure and mechanical properties of high-temperature free-oxygen rolled Cu/1060Al bimetallic composite materials

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy