Abstract:Phase-change memory (PCM) has great potential for numerous attractive applications on the premise of its high-device performances, which still need to be improved by employing a material with good overall phase-change properties. In respect to fast speed and high endurance, the Ti-Sb-Te alloy seems to be a promising candidate. Here, Ti-doped Sb2Te3 (TST) materials with different Ti concentrations have been systematically studied with the goal of finding the most suitable composition for PCM applications. The thermal stability of TST is improved dramatically with increasing Ti content. The small density change of T0.32Sb2Te3 (2.24%), further reduced to 1.37% for T0.56Sb2Te3, would greatly avoid the voids generated at phase-change layer/electrode interface in a PCM device. Meanwhile, the exponentially diminished grain size (from ∼200 nm to ∼12 nm), resulting from doping more and more Ti, enhances the adhesion between phase-change film and substrate. Tests of TST-based PCM cells have demonstrated a fast switching rate of ∼10 ns. Furthermore, because of the lower thermal conductivities of TST materials, compared with Sb2Te3-based PCM cells, T0.32Sb2Te3-based ones exhibit lower required pulse voltages for Reset operation, which largely decreases by ∼50% for T0.43Sb2Te3-based ones. Nevertheless, the operation voltages for T0.56Sb2Te3-based cells dramatically increase, which may be due to the phase separation after doping excessive Ti. Finally, considering the decreased resistance ratio, TixSb2Te3 alloy with x around 0.43 is proved to be a highly promising candidate for fast and long-life PCM applications.

Investigation of Cr 0.06 (Sb 4 Te) 0.94 alloy for high-speed and high-data-retention phase change random access memory applications

Investigation of Cr(SbTe) alloy for high-speed and high-data-retention phase change random access memory applications

Cr-doped Sb2Te materials promising for high performance phase-change random access memory

A Candidate Zr-Doped Sb2te Alloy for Phase Change Memory Application

Phase Transition Behaviors of Ga30Sb70/Sb80Te20 Nanocomposite Multilayer Films for Application in Phase Change Random Access Memory

Ta-doped Ge5Sb95 Phase Change Thin Films for High Speed and Low Power Application

Scandium Doping Brings Speed Improvement in Sb2Te Alloy for Phase Change Random Access Memory Application

Excellent thermal stability attributed to Cr dopant in Sb2Te phase change material

Ge/Sb2Te3 nanocomposite multilayer films for high data retention phase-change random access memory application

Characterization of Cr-doped Sb2 Te3 Films and Their Application to Phase-Change Memory

Co-doping: An effective strategy for developing stable and high-speed Sb2Te-based phase-change memory

Atomic Scale Insight into the Effects of Aluminum Doped Sb2Te for Phase Change Memory Application

Sb Rich Ge2sb5te5 Alloy For High-Speed Phase Change Random Access Memory Applications

Investigation of Ge-Sn-Te Alloy for Long Data Retention and High Speed Phase Change Memory Application

Investigation Of Al-Sb-Se Alloy For Long Data Retention And Low Power Consumption Phase Change Memory Application

Sb 7 Te 3 /znsb Multilayer Thin Films for High Thermal Stability and Long Data Retention Phase-Change Memory

Non-volatile Multi-Level Cell Storage Via Sequential Phase Transition in Sb7Te3/GeSb6Te Multilayer Thin Film

W-Sb-Te Phase-Change Material: A Candidate For The Trade-Off Between Programming Speed And Data Retention

Ti-Sb-Te alloy: a candidate for fast and long-life phase-change memory.

Phase Change Material W-0.04(Sb4te)(0.96) for Application in High-Speed Phase Change Memory

Phase-Change Material Ge0.61sb2te For Application In High-Speed Phase Change Random Access Memory