Abstract:Achieving high piezoelectric performance in the representative lead-free materials of Bi1/2Na1/2TiO3-BaTiO3 (BNT-BT) is of great interest. However, it remains a challenge in these materials, as they feature structural phases with strong octahedral tilting at morphotropic phase boundary (MPB). Herein, we obtain good piezoelectric performance with relatively large d 33 value (219 pC/N), small coercive field (1.5 kV/mm), and good thermal stability in the (1-x)(Na0.5Bi0.5)TiO3-x(0.9BaTiO3-0.1BiAlO3) ternary system by crystal structure design. It is found that the incorporation of BiAlO3 with large tolerance factor can suppress the octahedral tilting and reduce the structural distortion of R3c and P4bm at MPB, and thus allows the electric field induced an extensive and reversible phase transformation. By using in-situ electric field synchrotron X-ray diffraction, it is revealed that the crystal lattice of the R3c phase with a smaller structural distortion responds more flexible to the electric field than that of the P4bm phase with a larger structural distortion. The piezoelectric strain analysis through profiles fitting indicates that the enhanced piezoelectric response attributed to both the activated domain switching and enhanced lattice strain benefited from the subtle phase structure. These findings provide further insights into the dynamic structural response of BNT-based materials, and will be helpful in designing high-performance piezoelectric materials beyond the MPB.

Template-based synthesis and piezoelectric properties of BiScO 3 –PbTiO 3 nanotube arrays

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Ferroelectric Pbtio3 Nanotube Arrays Synthesized By Hydrothermal Method

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Effects of LiNbO3 Doping on the Microstructures and Electrical Properties of BiScO3–PbTiO3 Piezoelectric System

Grain boundary region and local piezoelectric response of BiScO 3 –PbTiO 3 nanoceramics prepared by combination of SPS and two-step sintering

Ferroelectric And Dielectric Properties Of Bi3.15nd0.85ti3o12 Nanotubes

Synthesis, characterization, photoluminescence and ferroelectric properties of PbTiO3 nanotube arrays

Effect of PbO seeding layers on the structure and properties of the sol-gel-derived BiScO3-PbTiO3 thin films

Morphotropic phase boundary and electric properties in (1 − x )Bi 0.5 Na 0.5 TiO 3 – x BaSnO 3 lead-free piezoelectric ceramics

Achieving large piezoelectric response and ultrahigh electrostriction in [001] textured BiScO3‐PbTiO3 high‐temperature piezoelectric ceramics

Structural origin for the high piezoelectric performance of (Na0.5Bi0.5)TiO3-BaTiO3-BiAlO3 lead-free ceramics

Fabrication of Lead-Free (na0.82k0.18)0.5bi0.5tio3 Piezoelectric Nanofiber by Electrospinning

Hydrothermal Synthesis of Tetragonal BaTiO3 Nanotube Arrays with High Dielectric Performance

BiScO3-PbTiO3 nanofibers piezoelectric sensor for high-temperature pressure and vibration measurements

Epitaxial Growth of Sol-Gel Derived BiScO3–PbTiO3 Thin Film on Nb-doped SrTiO3 Single Crystal Substrate

Piezoelectric Nanoceramics

Large piezoelectric properties of (1 − x)Na 0.5 Bi 0.5 TiO 3 –xBaTiO 3 thin films prepared by sol–gel method

Magnetic and Electrical Properties of Pbtio3/Mn-Zn Ferrite Multiphase Nanotube Arrays by Electro-Deposition

Template-Based Synthesis and Magnetic Properties of Mn-Zn Ferrite Nanotube and Nanowire Arrays

Fabrication and Properties of Epitaxial Growth BiScO3–PbTiO3 Thin Film Via a Hydrothermal Method