Abstract:For the filling and reconstruction of non-healing bone defects, the application of porous ceramic scaffold as bone substitutes is considered to be a reasonable choice. In bone tissue engineering, an ideal scaffold must satisfy several criterias such as open porosity, having high compressive strength (it depends where in body, and if external fixatures are used) and the practicability for cell migration. Many researchers have focused on enhancing the mechanical properties of hydroxyapatite scaffolds by combining it with other biomaterials, such as bioglass and polymers. Nevertheless, there is still a lack of suitable scaffolds based on porous biomaterials. In this study, zirconia scaffolds from two different templates (polyurethane (PU) and Acrylonitrile Butadiene Styrene (ABS) templates) were successfully fabricated with dissimilar fabrication techniques. The scaffold surfaces were further modified with mesoporous bioglass for the purpose of bone tissue engineering. In the study of PU template scaffold, high porosity (~88%) sol-gel derived yttria-stabilized zirconia (YSZ) scaffold was prepared by a polyurethane (PU) foam replica method using sol-gel derived zirconia for the first time, and double coated with Mesoporous Bioglass (MBGs) coating. For the ABS template scaffold, two types of templates (cube and cylinder) with different strut spacings were used and fabricated by a 3D Rapid Prototyper. Subsequently, zirconia scaffolds with low porosity (63±2.8% to 68±2.5%) were fabricated by embedding the zirconia powder slurry into the ABS templates and burning out the ABS to produce a uniform porous structure. The zirconia scaffolds were double coated with mesoporous bioglass by dip coating for the first time. The porosities of the scaffolds were calculated before and after coating. The microstructures were then examined using scanning electron microscopy and the mechanical properties were evaluated using compressive test. Accordingly, relationships between microstructure, processing and mechanical behaviour of the porous zirconia was discussed. Scaffold biocompatibility and bioactivity was also evaluated using a bone marrow stromal cell (BMSC) proliferation test and a simulated body fluid test.

Mechanisms of Tetraneedlelike ZnO Whiskers Reinforced Forsterite/bioglass Scaffolds

Characterization of Mechanical and Biological Properties of 3-D Scaffolds Reinforced with Zinc Oxide for Bone Tissue Engineering

Characterization of the Mechanical Behaviors and Bioactivity of Tetrapod ZnO Whiskers Reinforced Bioactive Glass/gelatin Composite Scaffolds.

Preparation and properties of T-ZnOw enhanced BCP scaffolds with double-layer structure by digital light processing

3D Printing Magnesium-Doped Wollastonite/β-Tcp Bioceramics Scaffolds with High Strength and Adjustable Degradation

Microstructural, mechanical properties and strengthening mechanism of DLP produced -tricalcium phosphate scaffolds by incorporation of MgO/ZnO/58S bioglass

Microstructural, mechanical properties and strengthening mechanism of DLP produced β-tricalcium phosphate scaffolds by incorporation of MgO/ZnO/58S bioglass

Ultrahigh Strength of Three-Dimensional Printed Diluted Magnesium Doping Wollastonite Porous Scaffolds

Dynamic Response and Reinforcement Mechanism of Composites Embedded with Tetraneedlelike ZnO Nanowhiskers

Digital Light Processing Strength-Strong Ultra-Thin Bioceramic Scaffolds for Challengeable Orbital Bone Regeneration and Repair in Situ

Enhancing bone scaffold interfacial reinforcement through in situ growth of metal-organic frameworks (MOFs) on strontium carbonate: Achieving high strength and osteoimmunomodulation

Silicon Carbide Whiskers Reinforced Akermanite Scaffolds for Tissue Engineering

Preparation, Mechanical Properties and in Vitro Degradability of Wollastonite/tricalcium Phosphate Macroporous Scaffolds from Nanocomposite Powders

Effects of MgO Nanoparticle Addition on the Mechanical Properties, Degradation Properties, Antibacterial Properties and in Vitro and in Vivo Biological Properties of 3D-Printed Zn Scaffolds

Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold

Dynamic compressive response and failure behavior of fiber polymer composites embedded with tetra-needle-like ZnO nanowhiskers

Dynamic Tensile Behavior and Fracture Mechanism of Polymer Composites Embedded with Tetraneedle-Shaped Zno Nanowhiskers

3D chitosan scaffolds loaded with ZnO nanoparticles for bone tissue engineering

Nanostructured Mesoporous Bioglass Coated Zirconia Scaffolds for Bone Tissue Engineering

Dissolution Behavior and Bioactivity Study of Glass Ceramic Scaffolds in the System of CaO–P2O5–Na2O–ZnO Prepared by Sol–gel Technique

In vitro cell proliferation evaluation of porous nano-zirconia scaffolds with different porosity for bone tissue engineering