Abstract:Nano composites have been utilized increasingly because of their high strength, stiffness, toughness, and through-thickness properties. The incorporation of carbon nano fibers with a high aspect ratio and extremely large surface area into glass/epoxy polymer composites improve their tensile and compression properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to investigate tensile and compression behavior of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry woven glass pre-form before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 2.0 weight percent CNF solution on glass fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum Assisted Resin Transfer Molding (VARTM). Tensile and compression tests were performed to evaluate the effectiveness and behavior of CNF addition on these mechanical properties. Results indicated simultaneous improvement in tensile and compression properties by incorporating a very small amount of carbon nano fibers into the matrix system. 18-21 percent improvement in tensile strength and 6-9 percent in compressive strength, with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber matrix adhesion and indications of CNF-induced matrix toughening due to the presence of CNFs. SEM evaluation also revealed relatively less damage in the tested fracture surfaces of the nano phased composites in terms of matrix failure, fiber breakage, matrix fiber de-bonding, and de-lamination, compared to the neat system.

Dynamic Response and Reinforcement Mechanism of Composites Embedded with Tetraneedlelike ZnO Nanowhiskers

Dynamic compressive response and failure behavior of fiber polymer composites embedded with tetra-needle-like ZnO nanowhiskers

Dynamic Tensile Behavior and Fracture Mechanism of Polymer Composites Embedded with Tetraneedle-Shaped Zno Nanowhiskers

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Dynamic mechanical behavior of fiber reinforced polymer composites embedded with ZnO whiskers

Silica Nanoparticle-Decorated Alumina Rough Platelets for Effective Reinforcement of Epoxy and Hierarchical Carbon Fiber/epoxy Composites

Dynamic Compressive Response and Failure Behavior of Basalt Fibers Polymer Functional Composites Embedded with ZnO Whiskers

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Acoustic emission based flexural characteristics of glass fiber reinforced composites embedded with ZnO nanowhiskers

Enhancing mechanical properties of an epoxy resin using “liquid nano-reinforcements”

Dynamic fatigue studies of ZnO nanowires by in-situ transmission electron microscopy

Toughing epoxy nanocomposites with Graphite-Nanocellulose layered framework

Preparation and performance of epoxy resin-based thermal conductive composites with different morphologies of ZnO

High‐performance epoxy vitrimer composites based on double dynamic covalent bonds

Synthesis, Characterization, and Modeling of Aligned ZnO Nanowire-Enhanced Carbon-Fiber-Reinforced Composites

Enhanced Thermomechanical Properties of ZrO2 Particle Reinforced Epoxy Nanocomposite

Microstructure and Mechanical Properties of Zr-Based Metallic Glass Composites with Size-Variable Tungsten Reinforcements

Influence of a Liquid-Like MWCNT Reinforcement on Interfacial and Mechanical Properties of Carbon Fiber Filament Winding Composites

Tensile and compression behavior of woven glass/epoxy nano composites based on spraying methodology

Preparation and mechanical properties of tungsten-particle-reinforced Zr-based bulk-metallic-glass composites

Synthesis and Property of Short Tungsten Fibre/zr-Based Metallic Glass Composite