Abstract:This paper attempts to study the loading rate effect of interface tensile failure behavior of carbon fiber-epoxy composites toughened with ZnO nanowires (ZnO NWs). ZnO NWs were grown onto woven carbon fiber fabrics through a two-step hydrothermal method, the growth time was carefully controlled to vary the nanowire length. Subsequently, a series of quasi-static and dynamic transverse fiber bundle (TFB) tensile tests were carried out under different loading velocities, ranging from 1 x 10(-6) m/s on the universal testing machine to 9 m/s on the electromagnetic Hopkinson bar. A 2D representative volume element (RVE) model has been established to identify the load transfer and failure behavior of the ZnO NW modified interface. The results show that under quasi-static loading, the maximum TFB tensile strength improvement owing to ZnO NWs was about 36.9% and 16.5% when compared with the pristine fibers and the fibers with surface sizing. However, due to the loading rate enhancement of the interface bonding strength, the corresponding values were decreased to 13.9% and 5.0% under dynamic loading. Besides, nanowires with medium length are recommended, because too long nanowires shall reduce the matrix impregnation space between fibers, and the microcracks from the fiber/matrix interface can easily deflect into the matrix along the nanowires. This side-effect may neutralize the enhancement mechanism of ZnO NWs when their length increases to a certain extent.

Dynamic fatigue studies of ZnO nanowires by in-situ transmission electron microscopy

In Situ Mechanical Resonance Behaviour of Pristine and Defective Zinc Blende GaAs Nanowires

Exceptional Deformability of Wurtzite Zinc Oxide Nanowires with Growth Axial Stacking Faults

In Situ Atomic-Scale Study on the Ultralarge Bending Behaviors of TiO2-B/Anatase Dual-Phase Nanowires.

Revealing the Mechanical Bending Mechanisms of Single-Crystalline Rutile TiO2 Nanowires Near Room Temperature: Implications for Nanostructured Semiconductors

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

Dynamic Nanomechanics of Zinc Oxide Nanowires

Lithiation of ZnO Nanowires Studied by In-Situ Transmission Electron Microscopy and Theoretical Analysis

Recent Findings on the Mechanical Responses of Nanostructures to Extreme Loading Conditions

Fatigue Behaviors in PZT Ceramics Induced by Mechanical Cyclic Load

Effect of Surface Morphology on the Mechanical Properties of ZnO Nanowires

Dynamic shear failure behavior of the interfaces in carbon fiber/ZnO nanowire/epoxy resin hierarchical composites

Lattice Dynamics of Twisted ZnO Nanowires under Generalized Born–von Karman Boundary Conditions

Deformation of Copper Nanowire under Coupled Tension–Torsion Loading

Effects of Surface Defects on the Mechanical Properties of ZnO Nanowires

Electrical Breakdown Of Zno Nanowires In Metal-Semiconductor-Metal Structure

Electrical Failure Behaviors of Semiconductor Oxide Nanowires

Size-dependent Phase Transformation and Fracture of ZnO Nanowires

Investigation on the Mechanical Behaviour of Faceted Ag Nanowires

In Situ TEM Investigation of ZnO Nanowires During Sodiation and Lithiation Cycling

Loading Rate Effect of the Interfacial Tensile Failure Behavior in Carbon Fiber–epoxy Composites Toughened with ZnO Nanowires