Abstract:Nano composites have been utilized increasingly because of their high strength, stiffness, toughness, and through-thickness properties. The incorporation of carbon nano fibers with a high aspect ratio and extremely large surface area into glass/epoxy polymer composites improve their tensile and compression properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to investigate tensile and compression behavior of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry woven glass pre-form before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 2.0 weight percent CNF solution on glass fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum Assisted Resin Transfer Molding (VARTM). Tensile and compression tests were performed to evaluate the effectiveness and behavior of CNF addition on these mechanical properties. Results indicated simultaneous improvement in tensile and compression properties by incorporating a very small amount of carbon nano fibers into the matrix system. 18-21 percent improvement in tensile strength and 6-9 percent in compressive strength, with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber matrix adhesion and indications of CNF-induced matrix toughening due to the presence of CNFs. SEM evaluation also revealed relatively less damage in the tested fracture surfaces of the nano phased composites in terms of matrix failure, fiber breakage, matrix fiber de-bonding, and de-lamination, compared to the neat system.

Dynamic compressive response and failure behavior of fiber polymer composites embedded with tetra-needle-like ZnO nanowhiskers

Dynamic mechanical behavior of fiber reinforced polymer composites embedded with ZnO whiskers

Dynamic Tensile Behavior and Fracture Mechanism of Polymer Composites Embedded with Tetraneedle-Shaped Zno Nanowhiskers

Dynamic Compressive Response and Failure Behavior of Basalt Fibers Polymer Functional Composites Embedded with ZnO Whiskers

Dynamic Response and Reinforcement Mechanism of Composites Embedded with Tetraneedlelike ZnO Nanowhiskers

Tensile Performance of Polymer Nanocomposites with Randomly Dispersed Carbon Nanothreads

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Acoustic emission based flexural characteristics of glass fiber reinforced composites embedded with ZnO nanowhiskers

Dynamic fatigue studies of ZnO nanowires by in-situ transmission electron microscopy

Synthesis, Characterization, and Modeling of Aligned ZnO Nanowire-Enhanced Carbon-Fiber-Reinforced Composites

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

Effect of Tungsten Fiber Diameter on the Dynamic Compression Properties of Tungsten Fiber/zr-Based Bulk Metallic Glasses Matrix Composite

Effect of one-dimensional tetra-needle-like ZnO whiskers on the electrical properties of montmorillonite/silicon carbide/epoxy micro-nanocomposites

Tensile and compression behavior of woven glass/epoxy nano composites based on spraying methodology

Dielectric Properties and Morphologies of Composites Filled with Whisker and Nanosized Zinc Oxide

Growth of ZnO nanorods/flowers on the carbon fiber surfaces using sodium alginate as medium to enhance the mechanical properties of composites

Study of thermal and dielectric behavior of low-density polyethylene composites reinforced with zinc oxide whisker

EFFECT OF W FIBER DIAMETER ON THE COMPRESSIVE MECHANICAL PROPERTIES OF THE Zr-BASED METALLIC GLASS COMPOSITES

Preparation and performance of epoxy resin-based thermal conductive composites with different morphologies of ZnO

Synthesis and Property of Short Tungsten Fibre/zr-Based Metallic Glass Composite