Abstract:Nonlinear buckling of elastic thin films on compliant substrates is studied by modeling and simulations to reveal the roles of pre-strain, elastic modulus ratio, and interfacial properties in morphological transition from wrinkles to buckle-delamination blisters. The model integrates an interfacial cohesive zone model with the Föppl–von Kármán plate theory and Green function method within the general framework of energy minimization. A kinetics approach is developed for numerical simulations. Subject to a uniaxial pre-strain, the numerical simulations confirm the analytically predicted critical conditions for onset of wrinkling and wrinkle-induced delamination, with which a phase diagram is constructed. It is found that, with increasing pre-strain, the equilibrium configuration evolves from flat to wrinkles, to concomitant wrinkles and buckle-delamination, and to an array of parallel straight blisters. The height and width of the buckle-delamination blisters can be approximately described by a set of scaling laws with respect to the pre-strain and interfacial toughness. Subject to an equi-biaxial pre-strain, the critical conditions are determined numerically to construct a similar phase diagram for the buckling modes. Moreover, by varying the pre-strain, modulus ratio, and interfacial toughness, a rich variety of equilibrium configurations are simulated, including straight blisters, and network blisters with or without wrinkles. These results provide considerable insight into diverse surface patterns in layered material systems as a result of the mechanical interactions between the film and the substrate through their interface, which suggests potential control parameters for designing specific surface patterns.

Radial Wrinkles on Film–substrate System Induced by Local Prestretch: A Theoretical Analysis

Radial Wrinkling of Viscoelastic Film-Substrate Systems

Wrinkling Phenomena in Neo-Hookean Film/Substrate Bilayers

Buckling and Post-Buckling of A Stiff Film Resting on an Elastic Graded Substrate

Wrinkling and Creasing of A Compressed Elastoplastic Film Resting on A Soft Substrate

Wrinkling of Thin Films on a Microstructured Substrate

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

Effects of Tension–compression Asymmetry on the Surface Wrinkling of Film–substrate Systems

Numerical Analysis on the Wrinkling Instability of a Stiff Film Adhering to an Elastic Substrate with a Graded Coating

Emergent antisymmetric wrinkling patterns in films on ridged substrates

Towards a Quantitative Understanding of Period-Doubling Wrinkling Patterns Occurring in Film/substrate Bilayer Systems.

Mechanism of Surface Wrinkle Modulation for a Stiff Film on Compliant Substrate

Surface Wrinkling of Nanostructured Thin Films on a Compliant Substrate

Stretch-induced wrinkling of highly orthotropic thin films

Mechanics of Tension-Induced Film Wrinkling and Restabilization: a Review

Wrinkle, fold, and ridge patterns of thin films attached to a compliant substrate: Direct numerical simulations involving plastic yielding

Effects of substrate nonlinear deformation on the wrinkling pattern transition in hyperelastic bilayer systems †

Wrinkling of Twisted Thin Films

Instabilities of Thin Films on a Compliant Substrate: Direct Numerical Simulations from Surface Wrinkling to Global Buckling

Nonlinear Analysis of Compressed Elastic Thin Films on Elastic Substrates: from Wrinkling to Buckle-Delamination

Multiple bifurcations in wrinkling analysis of thin films on compliant substrates