Abstract:In hexagonal close-packed (HCP) metals and alloys, the asymmetric yield effect that strongly evolves with the internal variables during continuous large deformations is clearly evident and significantly influences their formability. This limits their engineering applications and significant scientific issues regarding the macro performance corresponding to microstructural and texture evolution arise. In this study, a powerful stress-invariant-asymmetric-yield function capable of accurately describing the hydrostatic pressure sensitivity (HPS), tension-compression strength differential effect (SHE), and anisotropy is applied. An analytical interpolation approach based on the hardening effect with the function of the internal variable and the Lode parameter of the stress state is developed to build the continuous evolution between two adjacent yield surfaces. A rate-independent large deformation hypoelasto-plastic constitutive relationship adequately considering the asymmetric yield evolution is built. A plastic potential for the nonassociated flow rule is introduced to eliminate the plastic dilatancy. The plastic modulus, corrected with the partial derivative of the continuously interpolated yield function with respect to the internal variable that is capable of capturing the evolution effect, is analytically deduced and straightforwardly expressed. The evolving asymmetric yield effect and its constitutive description are then numerically validated, with insignificant errors and high efficiency, by the explicit integration algorithm of finite element simulations of continuous large deformations of the through-thickness and in-plane compressed Zr. The results indicate that (1) for the different levels of pre-strain, the continuously interpolated asymmetric yield function, together with the proposed constitutive relationship, can precisely describe the non-evolving asymmetric yield of HCP-structured Zr as the traditional ones (Yoon et al., 2014; Plunkett et al., 2007) without considering the evolution effect; (2) for continuous large deformation loading, the continuous yield surfaces built by the continuous interpolation of the stress-invariant-asymmetric-yield function and the proposed constitutive relationship, considering the evolution effect, jointly and clearly corrects the strain hardening rates for all loading routes except the X uniaxial tension without the evolution, and the corrected simulations are in better agreement with the theoretical stress-strain data than uncorrected simulations, in particular for the routes along which the yield surfaces clearly evolve; (3) although the in-plane compressed Zr presents a significantly stronger asymmetric yield effect evolving with the accumulative plastic strain compared to the throughthickness compressed Zr during continuous large deformations, the continuously interpolated yield function and the constitutive relationship considering the evolution effect can still precisely describe the strain hardening processes and stress-strain relationships, and accurately capture the strain-softening effect along the equibiaxial tensile route of the in-plane compressed Zr that cannot be captured by the combinations of the traditional yield functions without considering the HPS, SDE, anisotropy, and their evolution and the general constitutive relationships unsuitable for the large deformation asymmetric yield. It is anticipated that the proposed asymmetric yield evolution and its large deformation constitutive description with the high accuracy and extensive applicability on various asymmetric yield functions, single or multiple internal variables, and complicated loading routes of nonlinear plastic behaviors will be used in precise engineering simulations of HCP metals and alloys and the corresponding scientific studies of microscopic mechanisms.

Subsequent Yielding of Polycrystalline Aluminum after Cyclic Tension–compression Analyzed by Experiments and Simulations

Investigation on Plastic Flow Behaviors of FCC Polycrystalline Aluminum under Pre-Cyclic Tension-Compression Loading: Experiments and Crystal Plasticity Modeling.

CRYSTAL PLASTICITY NUMERICAL ANALYSIS ON YIELD AND SUBSEQUENT YIELD OF POLYCRYS-TALLINE COPPER UNDER COMBINED TENSION--TORSION LOADING

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

Anisotropy of Yielding/Hardening and Micro-Inhomogeneity of Deforming/Rotating for A Polycrystalline Metal under Cyclic Tension Compression

Subsequent Yield and Plastic Flow Analysis of Polycrystalline Copper under Biaxial Loading

MEASURING SUBSEQUENT YIELD SURFACE OF PURE COPPER BY CRYSTAL PLASTICITY SIMULATION

The Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model.

Investigation on the Evolution of Subsequent Yield Surface of Pure Aluminum under Changing Loading Paths Considering Microstructure Effects

Yield Surfaces and Plastic Flow of 45 Steel under Tension-Torsion Loading Paths

4223 - ANALYSIS ON CYCLIC PLASTICITY AND STRESS DISTRIBUTION OF POLYCRYSTAL AT GRAIN LEVEL

Numerical simulation of plastic behavior and meso inhomogeneous deformation in AZ31 Mg alloy

The Tension/compression Asymmetry of a High Γ′ Volume Fraction Nickel-based Single-Crystal Superalloy

Characterization and modelling of evolving plasticity behaviour up to fracture for FCC and BCC metals

Experimental Investigations on Subsequent Yield Surface of Pure Copper by Single-Sample and Multi-Sample Methods under Various Pre-Deformation

An Anomalous Compression-Induced Softening Behavior of AA6014-T4P During Cyclic Loading

Deformation Behavior and Anisotropic Response of 2060 Al-Cu-Li Alloy: Experimental Investigation and Computational Homogenization-Based Crystal Plasticity Modeling

A Virtual Laboratory Using High Resolution Crystal Plasticity Simulations to Determine the Initial Yield Surface for Sheet Metal Forming Operations

Asymmetric Yield Effect Evolving with Internal Variables During Continuous Large Deformations and Its FEM Validation

Investigation of Anisotropic Subsequent Yield Behavior for 45 Steel by the Distortional Yield Surface Constitutive Model

Modeling of Heterogeneous Tensile Deformation of Polyscrystalline Aluminum