Abstract:The influence of orientation on the creep rupture properties of a single crystal superalloy DD6 under multiaxial stress was carried out at 980 degrees C and 400 MPa. A circumferential V-type notched specimen had been designed to investigate the effect of multiaxial stress state on the creep behavior. It was found that the creep lifetimes of the [111] oriented notched specimen were slightly longer than that of the [011] orientation and 1.36 times longer than that of the [001] orientation. The computational results showed that the strain and damage distribution revealed fourfold symmetry, double symmetry and threefold symmetry for [001], [011] and [111] orientation respectively, which was confirmed by experimental observation. At high temperature the creep anisotropy in three different orientations exhibited mainly in primary and secondary creep stages. Through the study of notched specimens by SEM, the morphology evolution of gamma'-phase proved that the directional coarsening was strongly dependent on the local effective stress and the direction of the local max principal stress with respect to loading axis. Fracture morphology displayed uneven cleavage configuration with multi-level feature, and the cleavage planes parallels (001), (011) and (111) crystal plane for [001], [011] and [111] orientation, respectively. The cleavage plane, which is attributed to the cracks propagated along the interfaces of gamma/gamma'phases, displayed square-like, rhombus-like and hexagon-like feature for [001], [011] and [111] orientation, respectively. Due to the higher density in dislocations of {111} planes, it is more easily as the secondary crack when the crack reach the {111} planes, which is thought to be the main reason of forming different feature on primary cleavage plane. (C) 2016 Elsevier B.V. All rights reserved.

The Tension/compression Asymmetry of a High Γ′ Volume Fraction Nickel-based Single-Crystal Superalloy

The Study of Tension/Compression Asymmetry of [111] Oriented Nickel Base Single Crystal Superalloys

Tension/compression Asymmetry of [001] Single-Crystal Nickel-Based Superalloy DD6 During Low Cycle Fatigue

Atomic Simulation of the Effect of Orientation on Tensile/compressive Properties in Nickel-Based Single Crystal Superalloys

Thermo-Mechanical Fatigue Constitutive Model for Nickel-Based Single Crystal Superalloys

Microstructure Characterization and Damage Coupled Constitutive Modeling of Nickel-Based Single-Crystal Alloy with Different Orientations

Influences of the Γ′ Phase on the Mechanical Properties of a Nickel-Based Single Crystal Superalloy

Anisotropic Creep Damage and Fracture Mechanism of Nickel-Base Single Crystal Superalloy under Multiaxial Stress

Ultrasonic Nonlinear Evaluation of Tensile Plastic Damage in Nickel Based Single Crystal Superalloy

Effect Of Heterogeneous Dual-Phase Microstructure On Tensile Response Of Nickel-Base Superalloy

The Effect of Grain Orientation on the Tensile‐compressive Asymmetry of Polycrystalline NiTi Shape Memory Alloy

Crystal Anisotropy of AZ31 Magnesium Alloy under Uniaxial Tension and Compression

The Effects of Stress Triaxiality, Temperature and Strain Rate on the Fracture Characteristics of a Nickel-Base Superalloy

Nanoindentation Study and Mechanical Property Analysis of Nickel-Based Single Crystal Superalloys

Tension-compression asymmetry in Ni/Ni 3 Al interfaces: An atomistic investigation

A Crystal Plasticity Based Constitutive Model for the Temperature Dependent Anomalous Behaviors of Nickel-Based Single-Crystal Superalloy

A Dislocation Density-Based Model for the Temperature Dependent Anomalous Behaviors of Nickel-Based Single-Crystal Superalloy

Interfacial dislocation evolution and yield mechanism of nickel-based single crystal superalloy: A molecular dynamics research

Deformation Mechanisms and Analysis of a Single Crystal Nickel-Based Superalloy During Tensile at Room Temperature

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation

Cyclic Viscoplastic Deformation Modeling of a Nickel-Based Single Crystal Superalloy with [001] Orientation