Abstract:This study aims at introducing the back stress of anisotropic strain-hardening into the crystal plasticity theory and demonstrating the rationality of this crystal plasticity model to describe the evolution of the subsequent yield surface of polycrystalline aluminum at the mesoscopic scale under complex pre-cyclic loading paths. By using two different scale finite element models, namely a global finite element model (GFEM) as the same size of the thin-walled tube specimen used in the experiments and a 3D cubic polycrystalline aggregate representative volume element (RVE) model, the evolution of the subsequent yield surface for different unloading cases after 30 pre-cycles is further performed by experiments and numerical simulations within a crystal plasticity finite element (CPFE) frame. Results show that the size and shape of the subsequent yield surfaces are extremely sensitive to the chosen offset strain and the pre-cyclic loading direction, which present pronounced anisotropic hardening through a translation and a distortion of the yield surface characterized by the obvious "sharp corner" in the pre-deformation direction and "flat" in the reverse direction by the definition of small offset strain, while the subsequent yield surface exhibits isotropic hardening reflected by the von Mises circle to be distorted into an ellipse by the definition of large offset strain. In addition, the heterogeneous properties of equivalent plastic strain increment are further discussed under different offset strain conditions. Modeling results from this study show that the heterogeneity of plastic deformation decreases as a law of fraction exponential function with the increasing offset strain. The above analysis indicates that anisotropic hardening of the yield surface is correlated with heterogeneous deformation caused by crystal microstructure and crystal slip. The crystal plasticity model based on the above microscopic mechanism can accurately capture the directional hardening features of the yield surface.

Subsequent Yield and Plastic Flow Analysis of Polycrystalline Copper under Biaxial Loading

CRYSTAL PLASTICITY NUMERICAL ANALYSIS ON YIELD AND SUBSEQUENT YIELD OF POLYCRYS-TALLINE COPPER UNDER COMBINED TENSION--TORSION LOADING

Anisotropy of Yielding/Hardening and Micro-Inhomogeneity of Deforming/Rotating for A Polycrystalline Metal under Cyclic Tension Compression

4223 - ANALYSIS ON CYCLIC PLASTICITY AND STRESS DISTRIBUTION OF POLYCRYSTAL AT GRAIN LEVEL

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

MEASURING SUBSEQUENT YIELD SURFACE OF PURE COPPER BY CRYSTAL PLASTICITY SIMULATION

Investigation on Plastic Flow Behaviors of FCC Polycrystalline Aluminum under Pre-Cyclic Tension-Compression Loading: Experiments and Crystal Plasticity Modeling.

Subsequent Yielding of Polycrystalline Aluminum after Cyclic Tension–compression Analyzed by Experiments and Simulations

Investigation on the Evolution of Subsequent Yield Surface of Pure Aluminum under Changing Loading Paths Considering Microstructure Effects

Numerical simulation of plastic behavior and meso inhomogeneous deformation in AZ31 Mg alloy

ANALYSIS OF CYCLIC PLASTICITY USING A POLYCRYSTALLINE MODEL TAKING ACCOUNT OF SIZE EFFECT

Analysis of Meso-Inhomogeneous Deformation on a Metal Material Surface under Low-Cycle Fatigue

Yield Surfaces and Plastic Flow of 45 Steel under Tension-Torsion Loading Paths

Study of Slip-band of Crystalline Grains on the Surface of Polycrystalline Tensile Specimen

Analysis of Slip-Band on Specimen Surface of Polycrystalline Copper under Tension

Grain-level Statistical Plasticity Analysis on Strain Cycle Fatigue of a FCC Metal

Prediction of Yield Surface of Single Crystal Copper from Discrete Dislocation Dynamics and Geometric Learning

Comprehensive Study of Plastic Deformation Mechanism of Polycrystalline Copper Using Crystal Plasticity Finite Element

The Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model.

Influence of Load Modes on the Characteristics of Severe Plastic Deformation Based on Crystal Plasticity Finite Element Method