Abstract:A yield surface of a material is a set of critical stress conditions beyond which macroscopic plastic deformation begins. For crystalline solids, plastic deformation occurs through the motion of dislocations, which can be captured by discrete dislocation dynamics (DDD) simulations. In this paper, we predict the yield surfaces and strain-hardening behaviors using DDD simulations and a geometric manifold learning approach. The yield surfaces in the three-dimensional space of plane stress are constructed for single-crystal copper subjected to uniaxial loading along the $[100]$ and $[110]$ directions, respectively. With increasing plastic deformation under $[100]$ loading, the yield surface expands nearly uniformly in all directions, corresponding to isotropic hardening. In contrast, under $[110]$ loading, latent hardening is observed, where the yield surface remains nearly unchanged in the orientations in the vicinity of the loading direction itself, but expands in other directions, resulting in an asymmetric shape. This difference in hardening behaviors is attributed to the different dislocation multiplication behaviors on various slip systems under the two loading conditions.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to predict the yield surface and its strain - hardening behavior in single - crystal copper materials. Specifically, the authors use Discrete Dislocation Dynamics (DDD) simulations and geometric manifold learning methods to construct the three - dimensional yield surface of single - crystal copper under plane - stress conditions and analyze its strain - hardening characteristics under different loading directions (such as [100] and [110] directions). ### Main research questions: 1. **Prediction of yield surface**: How can the yield surface of single - crystal copper under plane - stress conditions be predicted through DDD simulations and geometric manifold learning methods? 2. **Strain - hardening behavior**: What are the differences in the strain - hardening behavior of single - crystal copper under [100] and [110] direction loadings? What are the reasons for these differences? 3. **Technical challenges**: How can technical obstacles such as high DDD simulation computational cost, large amount of data, and complex parametric expressions be overcome to efficiently construct the yield surface? ### Research background: - **Importance of yield surface**: The yield surface is a criterion for describing the onset of macroscopic plastic deformation of materials. For crystalline materials, plastic deformation is mainly achieved through dislocation motion. - **Limitations of existing methods**: Traditional yield criteria (such as von Mises and Tresca criteria) are mainly used for isotropic materials, while crystalline materials have obvious anisotropy and more accurate methods are required to describe their yield behavior. - **Technical challenges**: DDD simulations have high computational costs, large amounts of data, and require efficient parametric methods to express the yield surface. ### Solutions: 1. **Efficient DDD simulations**: Use subcycling integrators and GPU acceleration technologies to improve the efficiency of DDD simulations. 2. **Geometric manifold learning methods**: Use geometric prior methods to construct the yield surface from DDD simulation data and represent the local characteristics of the yield surface through coordinate charts. 3. **Local refinement**: By calculating the curvature of the yield surface (such as Gaussian curvature), identify the areas that need further refinement, thereby improving the accuracy of the model. ### Main findings: - **Evolution of yield surface**: Under [100] - direction loading, the yield surface expands almost uniformly, corresponding to isotropic hardening; while under [110] - direction loading, the yield surface remains unchanged near the loading direction but expands in other directions, resulting in an asymmetric shape, corresponding to latent hardening. - **Dislocation multiplication behavior**: The different hardening behaviors under [100] and [110] - direction loadings are attributed to the dislocation multiplication behaviors on different slip systems. ### Conclusion: This study successfully predicted the yield surface and its strain - hardening behavior of single - crystal copper under plane - stress conditions by combining efficient DDD simulations and geometric manifold learning methods, providing new insights for understanding the plastic deformation mechanisms of crystalline materials.

Prediction of Yield Surface of Single Crystal Copper from Discrete Dislocation Dynamics and Geometric Learning

Prediction of yield surface of single crystal copper from discrete dislocation dynamics and geometric learning

Advanced Numerical Characterization of Mono-Crystalline Copper with Defects

Subsequent Yield and Plastic Flow Analysis of Polycrystalline Copper under Biaxial Loading

Predicting the flow stress and dominant yielding mechanisms: analytical models based on discrete dislocation plasticity

Anisotropy of Yielding/Hardening and Micro-Inhomogeneity of Deforming/Rotating for A Polycrystalline Metal under Cyclic Tension Compression

CRYSTAL PLASTICITY NUMERICAL ANALYSIS ON YIELD AND SUBSEQUENT YIELD OF POLYCRYS-TALLINE COPPER UNDER COMBINED TENSION--TORSION LOADING

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

A fundamental understanding of how dislocation densities affect strain hardening behavior in copper single crystalline micropillars

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Investigation of the Plastic Deformation of Single Crystal Copper Using a Two-Dimensional Discrete Dislocation Dynamics Model

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Dislocation density-based plasticity model from massive discrete dislocation dynamics database

Crystalline Plasticity On Copper (001), (110), And (111) Surfaces During Nanoindentation

Atomistic Numerical Investigation of Single-crystal Copper Nanowire with Surface Defects

Microplasticity and yielding in crystals with heterogeneous dislocation distribution

Multiaxial Behavior of Nanoporous Single Crystal Copper: a Molecular Dynamics Study

Molecular Dynamics Simulation of Surface Effect on Tensile Deformation of Single Crystalline Copper

A mesoscale investigation of strain rate effect on dynamic deformation of single-crystal copper

Simulation of Internal~ Stresses~ Near the Surface and Fatigue Crack Nucleation for A Copper Single Crystal in Cyclic Deformation Saturation Stage