Abstract:A series of samples with the precursor's molar ratio of {KMn8O16}/{CuFe2O4} = 0, 0.008, 0.010, 0.016, and 0.020 were successfully synthesized for selective catalytic reduction of NO by CO. The physicochemical properties of all samples were studied in detail by combining the means of X-ray photoelectron spectroscopy, H2-temperature-programmed reduction, scanning electron microscopy mapping, X-ray diffraction (XRD), N2 physisorption (Brunauer-Emmett-Teller), NO + CO model reaction, and in situ Fourier transform infrared spectroscopy techniques. The results show that three phases of γ-Fe2O3, CuFe2O4, and CuO, which have strong synergistic interaction, coexist in this catalyst system, and different phases play a leading role in different temperature ranges. Mn species are highly dispersed in the three-phase coexisting system in the form of Mn2+, Mn3+, and Mn4+. Because of the strong interaction between Mn2+ and Fe species, a small amount of Cu2+ precipitates from CuFe2O4 and grows along the CuO(110) plane, which has better catalytic performance. Mn3+ can inhibit the conversion of γ-Fe2O3 to α-Fe2O3 at high temperature and then increases the high-temperature activity. The synergistic effect between Mn4+ and the surfaces of three phases generates active oxygen species Cu2+-O-Mn4+ and Mn4+-O-Fe3+, which can be more easily reduced to some synergistic oxygen vacancies during the reaction. Furthermore, the formed synergistic oxygen vacancies can promote the dissociation of NO and are also propitious to the transfer of oxygen species. All of these factors make the appropriate manganese-modified three-phase coexisting system have better catalytic activity than the manganese-free catalyst, making NO conversion rate reach 100% at around 250 °C and maintain to 1000 °C. Combining comprehensive analysis of various characterization results and in situ infrared as well as XRD results in the equilibrium state, a new possible NO + CO model reaction mechanism was temporarily proposed to further understand the catalytic processes.

Catalytic Oxidation of Nitric Oxide over Mn–Fe Metal Oxides Catalysts

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Low-temperature catalytic oxidation of NO over Mn-Ce-Ox catalyst

Catalytic Oxidation of NO over Fe-Doped MnO2 Catalyst

Enhanced low-temperature NO oxidation by iron-modified MnO2 catalysts

Manganese-Based Catalysts Supported on Titania for the Oxidation of Nitric Oxide

Synthesis of Mn-Fe/γ-Al2O3 and Its Performance in Catalytic Oxidation of NO

Active Manganese Oxide on MnOx–CeO2 Catalysts for Low-Temperature NO Oxidation: Characterization and Kinetics Study

Characterization and Catalytic Activity of Mn-Co/TiO2 Catalysts for NO Oxidation to NO2 at Low Temperature

Catalytic Oxidation of NO over MnOx–CeO2 and MnOx–TiO2 Catalysts

Study of the Promotion Effect of Iron on Supported Manganese Catalysts for No Oxidation

Taming NO oxidation efficiency by γ-MnO2 morphology regulation

Effect of Fe Reduced-Modification on TiO 2 Supported Fe–Mn Catalyst for NO Removal by NH 3 at Low Temperature

Effect of Calcination Conditions on MnOx/Al2O3 Catalytic Efficiency for NO Oxidation

Investigation of Fe-Ni Mixed-Oxide Catalysts for the Reduction of NO by CO: Physicochemical Properties and Catalytic Performance

Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

Effect of Fe reduced-modification on TiO2 supported Fe–Mn catalyst for NO removal by NH3 at low temperature

Iron, lanthanum and manganese oxides loaded on γ-Al2O 3 for selective catalytic reduction of NO with NH 3 at low temperature

Mn‐Fe‐Ce Coating Onto Cordierite Monoliths As Structured Catalysts for NO Catalytic Oxidation

Mn-Modified CuO, CuFe2O4, and Γ-Fe2o3 Three-Phase Strong Synergistic Coexistence Catalyst System for NO Reduction by CO with a Wider Active Window.

NO catalytic oxidation over copper manganese oxide at room temperature