Abstract:Side-pumping fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers and amplifiers operating in the mid-IR wavelength range and based on soft-glass optical fibres. However, conventional fabrication methods face limitations due to significant differences in the thermal properties of pump-delivering silica fibres and signal-guiding fluoride-based fibres. To address these challenges, this work introduces a design for a fuse-less side-polished (D-shaped) fibre-based pump combiner comprising multimode silica and double-clad fluoride-based fibres. The results demonstrate stable coupling efficiency exceeding 80% at a 980-nm wavelength over 8 hours of continuous operation under active thermal control. The developed pump combiner has also been successfully integrated into a linear Er-doped fibre laser cavity, showing continuous-wave generation at 2731 or 2781-nm central wavelength with an output power of 0.87 W. Overall, this innovative approach presents a simple, repeatable, and reproducible pump combiner design that opens up new possibilities for leveraging fibre-based component technology in soft glass matrices and other emerging fibres with unique compositions.

Fabrication of high-efficiency pump and signal combiner based on a thermally expanded core technique

Pump-Signal Combiner With Large-Core Signal Fiber Feed-Through For Fiber Lasers And Amplifiers

Design and fabrication of >20 KW 5 × 1 pump combiner with high efficiency

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

High power signal combiner for fiber lasers

Novel 3 × 1 signal combiner with high-power fiber laser output of high beam quality

Research on Multi-Kilowatts Level Tapered Fiber Bundle N×1 Pumping Combiner for High Power Fiber Laser

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique

High-robustness good-beam-quality 3×1 signal combiner device for 10-kW all-fiber laser combining applications

High power ring spot adjustable fiber combiner based on (6 + 3) × 1 structure

Side-polished Silica-Fluoride Multimode Fibre Pump Combiner for Mid-IR Fibre Lasers and Amplifiers

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

High power laser coupling from solid-core fibers to anti-resonant hollow-core fibers by fiber tapering technology

All-fiber cascaded combiners for high-power adjustable-ring mode laser beam with a flattop central beam

Fiber coupler for mode selection and high-efficiency pump coupling.

High coupling efficiency and low signal light loss (2 + 1) × 1 coupler

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Fabrication of a tellurite-fiber-based side-pump coupler based on the tapered-fused method