Abstract:Modelling results are presented concerning the spatial distribution of plasma parameters in a laser-induced plasma plume with laser welding as the research background. In the modelling, the plasma plume characteristics are affected by many factors, such as the temperature and flow velocity of the metal vapour leaving the welded workpiece surface, the velocity of the shielding gas injected coaxially with the laser beam, the velocity of the assisting gas injected laterally with respect to the workpiece, and the energy absorption and radiation heat loss of the plasma plume. Typical computed distributions of temperature, velocity, vapour concentration, absorption coefficient and the refraction index within the plasma plume are presented with the continuous-wave (CW) CO2 laser welding of an iron workpiece as the calculation example. The predicted temperatures of the plasma plume are shown to be reasonably consistent with the corresponding experimental data. It is also shown that the metal-vapour/shielding-gas momentum ratio plays an important role in determining the height of the plasma plume formed in the laser welding. Due to the cooling effect of the shielding gas, the dimensions of the plasma plume will become smaller and thus laser absorption and refraction by the plasma plume can be reduced by increasing the shielding-gas velocity. The laterally injected assisting gas may also significantly affect the plasma plume and thus can be used to control the effect of the laser-induced plasma plume on the laser welding process.

Characteristics of Plasma Plume and Effect Mechanism of Lateral Restraint During High Power Co2 Laser Welding Process

Effect of External Constraint on the Characteristics and Behavior of the Plasma Plume During High-Power CO 2 Laser Welding

Plasma Behavior and Control with Small Diameter Assisting Gas Nozzle During Co2 Laser Welding

Research on plasma in high power carbon dioxide laser welding of ship plate

Behavior of the Plasma Characteristic and Droplet Transfer in CO2 Laser–gmaw-P Hybrid Welding

Study of plasma control in high-power CO2 laser welding

Laser-induced Plasma Control in CO 2 Laser Welding

Stability Information in Plasma Image of High-Power CO2 Laser Welding

Active control effect of shielding gas flow on high-power fiber laser welding plume

Plasma control in high-power CO2 laser welding

Analysis of laser induced plasma behavior and process stability in high power CO_2 laser welding of homemade ship plate

Effect of plume on weld penetration during high-power fiber laser welding

An analysis of Plasma Phenomena and Influencing Factors of Plasma in High Power Laser Welding

Three-dimensional Modelling of the Laser-Induced Plasma Plume Characteristics in Laser Welding

Characteristic Analysis on Laser Induced Plasma of Different Penetration Condition in High Power CO2 Laser Welding

Effect of He–Ar Ratio of Side Assisting Gas on Plasma 3D Formation During CO2 Laser Welding

Study on the Effect of Laser-Induced Plasma Plume on Penetration in Fiber Laser Welding under Subatmospheric Pressure

The Behavior and Its Control of Plasma Produced During Laser Welding

Dynamic Features of Plasma Plume and Molten Pool in Laser Lap Welding Based on Image Monitoring and Processing Techniques

Effect of Shielding Gas on the Plasma Plume in Pulsed Laser Welding

Study on Side Assist Blowing Gas with Different Composition in High Power CO_2 Laser Welding