Abstract:High-efficient welding technology with rotating arc assisted by laser under shielding gases with different He content was investigated for the application of 9% Ni steel in LNG storage. High-speed image and electrical signal acquisition were adopted to investigate arc stability and metal transfer behavior during hybrid laser arc welding. The results indicated that with increasing content of He, the weld formation became better first and then worse. Ar+30 %He improved the formation of welding seam. The He content had a significant influence on the electric signal waveforms. With the addition of 30 %He, the waveforms had the minimal fluctuation. It was rotating spray transfer with pure Ar, Ar+30 %He and Ar+50 %He. The difference was that with the He content increase, transfer mode shifted from unstable rotating spray transfer to stable rotating spray transfer, to irregular rotating spray transfer. With pure He, it was large droplet transfer, resulting in the formation of large spatters. The research of rotating spray transfer trajectory showed that the rotation velocity was relatively constant and one rotation time was 3.19 ms in one pulse period under Ar+30 %He. The trajectory equation was obtained for describing the rotating spray transfer. This indicated that the addition of 30 %He improved the coupling effect of laser and arc, enhanced the matching degree between rotating spray transfer and arc pulse period. It was meaningful to understand the effects of shielding gases on 9% Ni steel hybrid laser arc welding, providing theoretical basis for LNG storage efficient and reliable manufacturing.

Effect of He–Ar Ratio of Side Assisting Gas on Plasma 3D Formation During CO2 Laser Welding

Investigation into the Effect of Ar Ratio in He-Ar Mixture Side Assisting Gas on Plasma Properties During Co2 Laser Welding Based on 3d Reconstruction

Study on the Influence of Side Assisting Gas on Energy Loss During CO2 Laser Welding Based on 3D Reconstruction

The Influence of Different He-Ar Ratios on High Power CO2 Laser Welding Process and Weld Formation

Plasma Behavior and Control with Small Diameter Assisting Gas Nozzle During Co2 Laser Welding

Study on Side Assist Blowing Gas with Different Composition in High Power CO_2 Laser Welding

Numerical and Experimental Study of the Effect of Side Assisting Gas During Laser Welding

Mechanism Study on the Effects of Side Assisting Gas Velocity During Co2 Laser Welding Process

Title an Analysis of the Role of Side Assisting Gasduring CO 2 Laser Welding

Effect of side gas on laser induced plasma during laser deep penetration welding

Effects of He-Ar shielding gas compositions on arc plasma physical properties in rotating laser + GMAW hybrid fillet welding: Numerical simulation

Research on plasma in high power carbon dioxide laser welding of ship plate

Effect of External Constraint on the Characteristics and Behavior of the Plasma Plume During High-Power CO 2 Laser Welding

Effects of Side Assist Gas on Weld Shaping in Laser Welding Process of Thin Stainless Plate

Influence of Side-blown Assist Gas Nozzle Position on Plasma Dimensions Characteristic

Behavior of the Plasma Characteristic and Droplet Transfer in CO2 Laser–gmaw-P Hybrid Welding

Characteristics of Plasma Plume and Effect Mechanism of Lateral Restraint During High Power Co2 Laser Welding Process

Stability Information in Plasma Image of High-Power CO2 Laser Welding

Effects of He Content in Shielding Gases on High-Efficient Hybrid Laser Arc Welding with C-276 Filler Metal

Effect of Ambient Pressure on Interaction Between Laser Radiation and Plasma Plume in Fiber Laser Welding

Effect of Shielding Gas on the Plasma Plume in Pulsed Laser Welding