Abstract:Abstract: Concrete is widely considered for its strength to withstand heavy loads and that‟s why this matrix is used for construction purposes. The growth in population has placed an enormous need for more and more infrastructure and it keeps growing. The outcome of this demand is the increase in production of cement. Massive amount of waste materials and byproducts are produced by manufacturing enterprises such as silica fumes, wood ash, and mineral slag and so on. As a result, waste management has become a huge problem for our environment. There are several minerals in wood ash, which can be extracted for further use. A big ingradient calcium carbonate, which is 25% or even 45% (depending on feedstock and burining condition). Less than 10 percent is potash and less than 1 percent is phosphate; there are some elements of iron, manganese, zinc, copper and some metal parts. These numbers however, vary as combustion temperature is an important element for the determination of wood ash. Many of these are in the form of oxides, mainly. If we mix the ashes to water the insoluble silica and calcium carbonate will settle to bottom and sodim salt and soluble potassium will dissolve. Sugarcane is commonly used to produce sugar and ethanol. After sugar juice is extracted from sugarcane, sugarcane bagasse is produced, which is about 50% of the sugarcane level. Bagasse is widely used as a fuel in combining steam production and power generation. In this process, sugarcane ash (SCBA) remains the last waste in the sugar production chain.. However, SCBA is generally disposed of in landfills in India The experimental investigations are carried out for compressive strength, split and flexural strength for curing period of 7, 14 and 28 days. The experimental results show that the for a combined replacement percentage of 8&8%, which includes 8% SCBA and 8% WOOD ASH with addition of aramid fiber 1.2% the values of compressive strength, flexural strength and split tensile strength were higher when compared to other replacement percentages The result shows that concrete workability is fine and within limits after replacing cement with SCBA, WOOD ASH with addition of aramid fiber. However, workability gets reduced at higher replacement of materials. The strength parameters such as compressive strength, flexural strength, and split tensile strength also increase and show an optimum value at 8&8% cement replacement and 1.2% Addition of aramid fibers respectively.

Chemical Activation of Bagasse Ash in Cement Mortar

Activation of Bagasse Ash in Cement Using Different Techniques

Preparation of Coal Gasification Coarse Slag-Based Alkaline Activator and Its Activation Mechanism in Alkali-Activated Slag

Use of Bagasse Ash in Concrete and Its Impact on the Strength and Chloride Resistivity

Strength and Chloride Resistance of Mortars Blended with SCBA: The Effect of Calcination and Particle Sizing on its Pozzolanic Activity

Effect of Alkali and Sulfate on the Hydration Characteristic of Cement-Based Materials Containing Coal Gasification Slag

Effect of different activation techniques on the engineering properties of cement-free binder containing volcanic ash and calcium carbide residue

Activation of Clay in Cement Mortar Applying Mechanical, Chemical and Thermal Techniques

Sodium carbonate-enhanced calcium carbide slag activation of sewage sludge for the preparation of green cementitious materials

Sugar cane bagasse ash as a partial substitute of Portland cement: Effect on mechanical properties and emission of carbon dioxide

Using calcium carbide residue to prepare ecological alkali activated slag composites: Effect of anion type

Sugarcane bagasse ash as supplementary cementitious material in cement composites: strength, durability, and microstructural analysis

Potential of sugarcane bagasse ash as supplementary cementitious material and comparison with currently used rice husk ash

Phosphoric acid activation of volcanic ashes: Influence of the molar ratio R = (MgO + CaO) / P2O5 on reactivity of volcanic ash and strength of obtained cementitious material

Effect of organic alkali on hydration of GGBS-FA blended cementitious material activated by sodium carbonate

The bio-activation of pozzolanic activity of circulating fluidized-bed fly ash by Paenibacilllus mucilaginosus

Sugarcane bagasse ash as supplementary cementitious material in concrete- a review

Mechanism of Different Mechanically Activated Procedures on the Pozzolanic Reactivity of Binary Supplementary Cementitious Materials

Prospective of sugarcane bagasse ash for controlling the alkali‐silica reaction in concrete incorporating reactive aggregates

Recycling of Bagasse Ash in Cement Manufacturing and its Impact on Clinker Potential and Environmental Pollution

To Study the Partial Replacement of Cement with Sugarcane Bagasse and Wood Ash with Addition of Aramid Fiber