Abstract:Device reliability is of great significance to resistive switching applications, and reset failure dominates the deterioration of cycling endurance. Although it has been found that the excessive aggregation of movable ions could lead to the reset failure, the quantitative studies on the defect movement have seldom been conducted. Hence, the Ni/Al2O3/p(+)Si sandwiched structure is fabricated by magnetron sputtering, and the reset failure phenomenon is analyzed. The measurements on the resistive switching behaviors demonstrate that the space-charge-limited current mechanism is responsible for the electroforming process, while the current conduction in subsequent switching cycles obeys the hopping mechanism. Temperature-dependent I-V measurements reveal that the resistance states are closely related with both the hopping distance (R) and hopping energy barrier (W) between adjacent localized states. Short hopping distance of 0.66 +/- 0.02nm and low hopping activation energy of 1.72 +/- 0.06meV will lead to the unrecoverable breakdown of Al2O3 dielectric layer, large leakage current, and deteriorative memory window. 1.9at.% ZnO doped into Al2O3 dielectric layer can lower the switching voltages and the compliance current of the devices, which will alleviate the aggregation of the localized states during the cycling process. As a result, the R and W values in high resistance state are stabilized at 2.24 +/- 0.04nm and 5.76 +/- 0.11meV during 100 direct current switching cycles, and the memory window is significantly improved. A physical model is proposed to understand the reset failure mechanism of Ni/Al2O3/p(+)Si devices.

Multilevel Unipolar Resistive Switching with Negative Differential Resistance Effect in Ag/SiO2/Pt Device

Realizing Multimode of Resistive Switching in Single Ag/SiO2/Pt Device Via Tuning Forming Compliance Current

Multilevel Resistive Switching in Ag/Sio2/Pt Resistive Switching Memory Device

Multilevel Resistive Switching Characteristics In Ag/Sio2/Pt Rram Devices

Bipolar Resistive Switching in the Ag/Sb 2 Te 3 /Pt Heterojunction

Bias-Polarity-Dependent Resistance Switching in W/Sio2/Pt and W/Sio2/Si/Pt Structures

Uniform Bipolar Resistive Switching Properties with Self-Compliance Effect of Pt/TiO2/p-Si Devices

Multilevel and Low-Power Resistive Switching Based on pn Heterojunction Memory

Nonvolatile Bipolar Resistive Switching in an Ag/TiO2/Nb : SrTiO3/In Device

Fabrication of Silicon Highly-Rich SiO<inf>x</inf>(x&#x003C;0.75) and Its Novel Resistive Switching Behaviors

Effect Of Nitrogen-Accommodation Ability Of Electrodes In Sinx-Based Resistive Switching Devices

Bipolar Resistive Switching Behaviors of Ag/Si(3)N(4)/Pt Memory Device

Reproducible Low-Current Resistive Switching of Metal/pr0.7ca0.3mno3/pt Junctions with a Point-Contact Top Electrode

Switching Failure Behaviors and Doping Enhanced Performances of Ni/Al2O3/p(+)Si Resistive Switching Devices

Negative Differential Resistance Effect Induced by Metal Ion Implantation in SiO2 Film for Multilevel RRAM Application

Unipolar Resistive Switching with Forming-Free and Self-Rectifying Effects in Cu/HfO2/n-Si Devices

Existence of Bipolar Resistive Switching with Self-Rectifying Behavior in a P-Cucro2/n-si Heterostructure

Nanocrystalline Si Pathway Induced Unipolar Resistive Switching Behavior from Annealed Si-rich SiNx/SiNy Multilayers

Reversible voltage dependent transition of abnormal and normal bipolar resistive switching

Bipolar Resistive Switching with Self-Rectifying Behaviors in P-Type AgCr1−xMgxO2 Thin Films

Bipolar Resistive Switching in the Ag/Sb<sub>2</sub>Te<sub>3</sub>/Pt Heterojunction