Abstract:Epitaxial SrTiO3 (STO) thin films were grown on (001)-oriented LaAlO3 (LAO) substrates at 800 °C by an ion beam sputter deposition (IBSD). Oxygen partial pressure (PO2) was varied at 1.5 × 10−5, 1.5 × 10−4, and 1.5 × 10−3 Torr during the growth. The effects of PO2 on crystal structure, oxygen vacancy, and surface morphology of the STO films were investigated and are discussed to understand their correlation. It was found that PO2 played a significant role in influencing the crystal structure, oxygen vacancy, and surface morphology of the STO films. All STO films grew on the LAO substrates under a compressive strain along an in-plane direction (a- and b-axes) and a tensile strain along the growth direction (c-axis). The crystalline quality of STO films was slightly improved at higher PO2. Oxygen vacancy was favorably created in the STO lattice grown at low PO2 due to a lack of oxygen during growth and became suppressed at high PO2. The existence of oxygen vacancy could result in a lattice expansion in both out-of-plane and in-plane directions due to the presence of Ti3+ instead of Ti4+ ions. The surface roughness of the STO films gradually decreased and was nearly close to that of the bare LAO substrate at high PO2, indicating a two-dimensional (2D) growth mode. The results presented in this work provide a correlation among crystal structure, oxygen vacancy, and surface morphology of the epitaxial STO films grown by IBSD, which form a useful guideline for further study.

Effects of the TiO2 Buffer Thickness on SrTiO3 (111) Epitaxial Films Grown on GaN (0002)

Epitaxial growth of SrTiO3 (0 0 1) films on multilayer buffered GaN (0 0 0 2) by pulsed laser deposition

Determination Of Refractive Indices And Thicknesses Of Ba0.7sr0.3tio3 Films With And Without Mgo (001) Buffer Layer On Silicon Substrate

Epitaxial growth of SrTiO3 films with different orientations on TiN buffered Si(001) by pulsed laser deposition

Effect of Oxygen Partial Pressure on Crystal Structure, Oxygen Vacancy, and Surface Morphology of Epitaxial SrTiO3 Thin Films Grown by Ion Beam Sputter Deposition

EPITAXIAL GROWTH OF <font>SrTiO</font><sub>3</sub> THIN FILMS BY SOL-GEL SYNTHESIS ON <font>LaAlO</font><sub>3</sub> AND <font>Ni</font> SUBSTRATES

Effects of SrTiO3/TiO2 Buffer Layer on Structural and Electrical Properties of BiFeO3 Thin Films Grown on GaN (0002)

Epitaxial growth of β-Ga2O3 thin films on SrTiO3 (1 1 1) and (1 0 0) substrates by chemical vapor deposition

Stoichiometry and Thickness of Epitaxial SrTiO$_{3}$ on Silicon (001): an Investigation of Physical, Optical and Electrical Properties

Growth of SrTiO3 Thin Films on BaxSr1−xTiO3 (x=0.3, 0.5) Seed Layers on Ni (200) Substrates Using Spin Coating Technique

Preparation of SrTiO3 Buffer Layers on BaxSr1−xTiO3 Seed Layers Buffered Ni Tapes by Chemical Solution Deposition

Growth of (Ba,Sr)TiO 3 Thin Films by MOCVD: Stoichiometry Effects

Anisotropic-Strain-Relaxation-Induced Crosshatch Morphology in Epitaxial Srtio3/Ndgao3 Thin Films

Effect of seed layers on the preparation of SrTiO3 buffer layers on Ni tapes via sol–gel method

Integration of (208) Oriented Epitaxial Hf-doped Bi4Ti3O12 with (0002) GaN Using SrTiO3/TiO2 Buffer Layer

Effect of Srtio3 Buffer Layers on Crystallization and Properties of Sol-Gel Derived Pb(Zr0.52ti0.48)O3 Thin Films

Impact of Cationic Stoichiometry on Physical, Optical and Electrical Properties of SrTiO3 Thin Films Grown on (001)-Oriented Si Substrates

Structural Behavior of Thin BaTiO3 Film Grown at Different Conditions by Pulsed Laser Deposition

Stable Structure and Effects of the Substrate Ti Pre-Treatment on the Epitaxial Growth of SrTiO 3 on GaAs

Composition dependence of structural and optical properties in epitaxial Sr(Sn1?xTix)O3 films

Formation and Effect of Deposited Thin TiO<sub>2</sub> Layer With Compressive Strain and Oxygen Vacancies on GaAs (001) Substrate