Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. This interesting study investigated the effect of Maleic Anhydride-grafted-Polypropylene/Epoxidized Natural Rubber (PP-g-MA/ENR) as a compatibilizing agent (CA) on the properties of a 30/70 Polypropylene/Natural Rubber PP/NR blends. The effect of dynamic vulcanization with sulfur-donors (i.e.: Tetramethyl thiuram disulfide (TMTD) and 4,4 Dithiodimorpholine (DTDM)) which were used as vulcanizing agents was also reported. Several formulations of TPVs with different concentrations of CA (from 5 to 15 phr) were prepared by mixing in the molten state using a Haake Rheocord 90. The structural analysis of dual compatibilizer was examined by FTIR spectroscopy. The rheological behavior was examined using Haake Rheocord 90. The mechanical properties were determined by the tensile measurements. The dynamic mechanical thermal properties were investigated by DMA. A morphological examination was conducted using SEM Microscopy, respectively. FTIR analysis confirmed reactions between the MA group in PP-g-MA and the epoxy groups in ENR, resulting in ENR-grafted PP with an ester and acid-based linkage. The Haake plastograms revealed a proportional increase in the final mixing torque value with the increasing content of CA. The mechanical results exhibited higher values in terms of tensile strength and Young's modulus for the TPVs containing CA compared to un-compatibilized ones. The compatibilized TPV blends exhibited a noteworthy increase in storage modulus and a notable decrease in loss tangent values with the CA concentration increased. Furthermore, the TPVs show two distinct-phase morphologies. That is, the TPV with CA showed the presence of smaller vulcanized rubber particles dispersed within the PP matrix, a phenomenon that becomes more pronounced with higher CA contents.

Studies of Latex Blends of Natural Rubber/poly(methyl Methacrylate-Co-2-ethylhexyl Methacrylate) and Their Comparison with Incompatible Natural Rubber/poly(methyl Methacrylate)

Study on compatibility of hydrogenated nitrile rubber and perfluoromethylvinylether(PMVE) rubber

Influence of Methyl Methacrylate-Co-glycidyl Methacrylate Copolymers on the Compatibility, Morphology and Mechanical Properties of Poly(butylene Terephthalate) and Polycarbonate Blends

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

SYNTHESIS, CHARACTERIZATION AND CROSSLINKING REACTION OF REACTIVE COMPOSITE LATEX

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Miscibility and Morphology of Ab/C-Type Blends Composed of Block-Copolymer and Homopolymer or Random Copolymer .1. Polyisoprene-Block-Poly(Methyl Methacrylate) Modified Polystyrene Blends

Blends of polydimethylsiloxane-based polyurethane and poly (propylene glycol)-based polyurethane with co-continuous structures: morphology evolution, synergistic effects and application in strain sensors

Blending In Situ Polyurethane-Urea With Different Kinds Of Rubber: Performance And Compatibility Aspects

Constituent compatibility and physical properties of bio‐based EUG/EPDM blends

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Effect of compatibilisers on the cure characteristics and mechanical properties of ternary rubber blend composites

The effect of physical compatibilization and dynamic vulcanization on the properties of thermoplastic vulcanizates derived from polypropylene and natural rubber blends

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer

Natural Rubber Blended with Polystyrene Nanoparticles Prepared by Differential Microemulsion Polymerization

Morphology and Mechanical Properties of Blends of Thermoplastic Polyurethane and Polyolefins

Miscibility and Morphology of AB/C‐type Blends Composed of Block Copolymer and Homopolymer or Random Coploymer, 2. Blends with Random Copolymer Effect

Influence of Epoxy Resin on the Morphological and Rheological Properties of PBT/ABS Blends Compatibilized by ASMA

Short Nylon 6 Fibre Reinforced Polystyrene/Natural Rubber Blends: Effect of Maleated-Polystyrene Compatibiliser

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

Study on the Natural Rubber Latex blending-modified with Chlorinated Paraffin