Abstract:The aspheric test via finite distance null compensation is limited by too many adjustment factors and low test precision. Here we establish an aspheric test system by integrating front null compensation with back null compensation, in which a compensation lens is used before and after the spherical center of the mirror to be tested and thus the front and back areas show aberration correlation. First, based on the aberration theory, the optical parameters of two compensation lenses arc theoretically derived and solved, and the relationship between the initial parameters and the normalized data is analyzed. Then the normalized results arc scaled and optimized by the optical design software. Four concave parabolic mirrors with different curvature radii arc designed under different magnifications of front null compensation lenses. The maximum aperture and the maximum relative aperture of the aspheric mirror arc obtained. The compensation lens with a 1/10 aperture ratio is used to realize the aspheric test of an aspheric mirror with a large aperture of 3.7 m and a large relative aperture of 1/1.2, and the peak-valley (PV) value of the residual wavefront error is superior to 0.1 lambda (lambda=633 nn). The tolerance analysis confirms that the test system is feasible. The principle experiment is conducted for the parabolic mirror with an aperture of 500 mm and a relative aperture of 1/1. The maximum diameter of the aspheric mirror and the difficulty of implementation arc compared between the proposed method and the classical configuration. The PV value and the RMS value of the designed wavefront error of the test system combining front and back null compensation is 0.061 lambda and 0.009 lambda, respectively. The RMS value is superior to lambda/10. The test system combining front and back null compensation is suitable for the high-precision test of aspheric surfaces with I m large diameter and large relative aperture.

Non-null Testing for Standard Quadric Surfaces with Subaperture Stitching Technique

Aspheric and Free-Form Surfaces Test with Non-Null Sub-Aperture Stitching

Non-null Annular Subaperture Stitching Interferometry for Aspheric Testing

Non-null Testing of the Aspheric Surface Using a Quadriwave Lateral Shearing Interferometer

Non-null interferometric aspheric testing with partial null lens and reverse optimization

Aspheric Subaperture Stitching Based on System Modeling.

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Retrace Error Correction for Non-Null Testing of Optical Aspheric Surface

Elimination of reference surface error on high-accuracy subaperture stitching

Research of precision interference locating method for a partial null compensator at aspheric testing

Determination of Aspheric Vertex Radius of Curvature in Non-Null Interferometry

Non-null Testing for Aspheric Surfaces Using Elliptical Sub-Aperture Stitching Technique.

Interferometric Measurement of Freeform Surfaces Using Irregular Subaperture Stitching

Defects Evaluation System for Spherical Optical Surfaces Based on Microscopic Scattering Dark-Field Imaging Method

Reverse Optimization Reconstruction of Aspheric Figure Error in a Non-Null Interferometer

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

Mixed compensation for the testing of large convex aspheres

Research on hybrid compensation testing of convex aspherical mirror

New Interferometric Method to Locate Aspheric in the Partial Null Aspheric Testing System

Aspheric Test Combining Front and Back Null Compensation for Infinite Optical Path

Alignment error model of subaperture stitching interferometry for aspheric surface based on wavefront aberrations