Abstract:Preparation of mullite from high-alumina coal fly ash (CFA) has become one of the most important ways for high-value utilization. However, low Al2O3/SiO2 ratio, poor reaction activity and various impurities in fly ash led to poor quality of mullite products. Conventional sintering method requires addition of aluminum sources and sintering additives, and high synthesis temperature. This paper proposes a new technical route for preparation of mullite whiskers entirely from fly ash by molten salt method based on additive activation-acid leaching process. The growth process and synthesis mechanism of mullite whiskers in Na2SO4 molten salt from fly ash were systematically investigated, and the application of fly ash-derived mullite whiskers in electronic packaging toughening ceramic was also explored. The results show that leaching liquor containing Al3+, Na+, and SO42−, and amorphous silica slag can be separated and obtained after acid leaching of activated fly ash at 80 °C, and the fly ash-derived mullite whiskers with a length of about 1 μm can be synthesized from the mixture of crystalline products and silica slag by the proposed method under the optimal synthesis conditions. Using amorphous silica slag with higher dissolution activity as the silicon source, the nucleation of mullite whiskers with homogeneous nucleation process is promoted and highly monodispersed mullite whiskers derived from fly ash form. The fly ash-derived mullite whiskers can improve the mechanical strength, reduce the dielectric constant and dielectric loss of the composite ceramic substrates, and the dielectric constant and dielectric loss of the composite ceramic are the lowest 5.16 and 0.006, respectively, when the mullite addition content is 20 wt.%, indicating that they could be used as electronic packaging materials. This paper provides a novel pathway for synthesis of mullite whiskers and high-value utilization of fly ash.

Recycling of Waste Fly Ash for Production of Porous Mullite Ceramic Membrane Supports with Increased Porosity

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Reaction-Sintered Porous Mineral-Based Mullite Ceramic Membrane Supports Made From Recycled Materials

Environment-oriented low-cost porous mullite ceramic membrane supports fabricated from coal gangue and bauxite

Recycling of Fly Ash for Preparing Porous Mullite Membrane Supports with Titania Addition

Preparation of porous mullite ceramic supports from high alumina fly ash

Enhanced Performance of Fly Ash-Based Supports for Low-Cost Ceramic Membranes with the Addition of Bauxite

Effect of Type and Content of Pore-forming Agents on Properties of Porous Alumina Membrane Support

Feasible recycling of industrial waste coal fly ash for preparation of anorthite-cordierite based porous ceramic membrane supports with addition of dolomite

Mullite whisker-constructed ceramic membranes prepared from fly ash by in-situ catalytic reaction

High-performance Macro-Porous Alumina-Mullite Ceramic Membrane Supports Fabricated by Employing Coarse Alumina and Colloidal Silica

Effect of V2O5 on the Properties of Mullite Ceramics Synthesized from High-Aluminum Fly Ash and Bauxite

Study on the preparation of ceramic membrane support and its Fe migration rule by high‐aluminum fly ash as raw material

Cost-effective Utilization of Mineral-Based Raw Materials for Preparation of Porous Mullite Ceramic Membranes Via In-Situ Reaction Method

Preparation of Mullite Ceramics from Coal Fly Ash by Deep-desilication Technology

Fabrication and properties of mullite-bonded porous SiC membrane supports using bauxite as aluminum source

Study on the Preparation and Properties of Talcum-Fly Ash Based Ceramic Membrane Supports

Preparation of low-cost mullite ceramics from natural bauxite and industrial waste fly ash

Molten Salt Synthesis of Mullite Whiskers Entirely Derived from Fly Ash for Electronic Packaging Toughening Ceramic Applications

Utilization of both Electronical Manganese Slag and Silicate Tailings as Raw Materials for Fabrication of Cost-effective Porous Ceramics

Properties and performance of cordierite-bonded porous silicon carbide membrane prepared using waste fly ash and other oxide additives