Abstract:Preparation of mullite from high-alumina coal fly ash (CFA) has become one of the most important ways for high-value utilization. However, low Al2O3/SiO2 ratio, poor reaction activity and various impurities in fly ash led to poor quality of mullite products. Conventional sintering method requires addition of aluminum sources and sintering additives, and high synthesis temperature. This paper proposes a new technical route for preparation of mullite whiskers entirely from fly ash by molten salt method based on additive activation-acid leaching process. The growth process and synthesis mechanism of mullite whiskers in Na2SO4 molten salt from fly ash were systematically investigated, and the application of fly ash-derived mullite whiskers in electronic packaging toughening ceramic was also explored. The results show that leaching liquor containing Al3+, Na+, and SO42−, and amorphous silica slag can be separated and obtained after acid leaching of activated fly ash at 80 °C, and the fly ash-derived mullite whiskers with a length of about 1 μm can be synthesized from the mixture of crystalline products and silica slag by the proposed method under the optimal synthesis conditions. Using amorphous silica slag with higher dissolution activity as the silicon source, the nucleation of mullite whiskers with homogeneous nucleation process is promoted and highly monodispersed mullite whiskers derived from fly ash form. The fly ash-derived mullite whiskers can improve the mechanical strength, reduce the dielectric constant and dielectric loss of the composite ceramic substrates, and the dielectric constant and dielectric loss of the composite ceramic are the lowest 5.16 and 0.006, respectively, when the mullite addition content is 20 wt.%, indicating that they could be used as electronic packaging materials. This paper provides a novel pathway for synthesis of mullite whiskers and high-value utilization of fly ash.

Mullite whisker-constructed ceramic membranes prepared from fly ash by in-situ catalytic reaction

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Fabrication of Catalytic Ceramic Nanofiber Membrane with High Permeability and Superior Catalytic Performance

MgO-Al2O3-SiO2- ZrO2 System Ceramic Glass As Sintering Aids to Fabricate Al2O3 Ceramic Membrane with High Acid Corrosion Resistance

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Molten Salt Synthesis of Mullite Whiskers Entirely Derived from Fly Ash for Electronic Packaging Toughening Ceramic Applications

Cost-effective Utilization of Mineral-Based Raw Materials for Preparation of Porous Mullite Ceramic Membranes Via In-Situ Reaction Method

Preparation of porous mullite ceramic supports from high alumina fly ash

Enhanced Performance of Fly Ash-Based Supports for Low-Cost Ceramic Membranes with the Addition of Bauxite

One Step Co-Sintering Synthesis of Gradient Ceramic Microfiltration Membrane with Mullite/alumina Whisker Bi-Layer for High Permeability Oil-in-water Emulsion Treatment

High-performance Macro-Porous Alumina-Mullite Ceramic Membrane Supports Fabricated by Employing Coarse Alumina and Colloidal Silica

Fabrication and characterization of porous mullite ceramics derived from fluoride-assisted Metakaolin-Al(OH)3 annealing for filtration applications

Fabrication of high-performance SiC ceramic membranes modified using in situ grown mullite whiskers and high-temperature filtration

Melded Ceramic Membranes: A Novel Fabrication Method for Ultrathin Alumina Membranes of High Performance

Reaction-Sintered Porous Mineral-Based Mullite Ceramic Membrane Supports Made From Recycled Materials

Fabrication of high-permeance SiC filters reinforced with in situ -grown mullite whiskers for gas/solid filtration

Properties and performance of cordierite-bonded porous silicon carbide membrane prepared using waste fly ash and other oxide additives

Permeability Behavior and Wastewater Filtration Performance of Mullite Bonded Porous SiC Ceramic Membrane Prepared Using Coal Fly Ash as Sintering Additive

Preparation of mullite whiskers from high alumina fly ash and its reinforced porous structure

Industrial waste silica-alumina gel recycling: Low-temperature synthesis of mullite whiskers for mass production

Influence of additive contents on the properties of SiC ceramic membranes and their performance in oil‐water separation