Abstract:Polycarbosilane (PCS) serves as a crucial precursor for silicon carbide (SiC) fibers and ceramics. However, both of the precursor and the resulting SiC ceramics are carbon-rich, which is often viewed as detrimental to their relevant high-temperature properties. In this work, PCS is modified using nanosized Si particles to improve SiC grain growth and reduce carbon content in the resulting SiC ceramics, and the structural evolution during the polymer–ceramic conversion process has been meticulously investigated. The findings reveal that the incorporation of nano-Si into PCS raises its actual ceramic yield and accelerates the organic-inorganic conversion process. This is attributed to the formation of a more crosslinked structure at 200 °C–350 °C, resulting from the reaction between the Si–OH groups in nanosized Si and the Si–H and Si–CH3 groups in PCS. The carbothermic reaction between nano-Si and the free carbon starts at approximately 1200 °C at the periphery of nanosized Si particles, and is accomplished at around 1400 °C. This leads to the formation of large-sized reactive β-SiC. Simultaneously, PCS-derived β-SiC with smaller sizes is also formed at 1300 °C–1400 °C. At 1600 °C–1800 °C, the growth of the reactive and the derived β-SiC in nano-Si-modified PCS is both accelerated due to a substantial decrease in the free carbon content. Consequently, the grain size of β-SiC is much larger than that of unmodified PCS. Additionally, the residual amorphous free carbon transforms into nanocrystalline carbon at around 1400 °C and evolves into graphite carbon at 1600 °C–1800 °C, which exhibits a more ordered structure with larger size compared to that in unmodified PCS.

High-ceramic-yield precursor to SiC-based ceramic: A hyperbranched polytitaniumcarbosilane bearing self-catalyzing units

Preparation and Stereolithography of SiC Ceramic Precursor with High Photosensitivity and Ceramic Yield

Allyl-Substituted Hydridopolycarbosilane with Low Curing Temperature and High Ceramic Yield under a Redox Initiation System

Preceramic Polymer As Precursor for Near‐stoichiometric Silicon Carbon with High Ceramic Yield

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Novel Synthesis of (Hf0.25zr0.25ti0.25ta0.25)c-Sic Biphasic Ceramic Micro-Powders Using Single-Source-precursor Route

A New SiC Precursor with High Ceramic Yield: Synthesis and Characterization of CHxMeSiH2‐containing Poly(methylsilane‐carbosilane)

Preparation and Characterization of Pure SiC Ceramics by HTPVT Induced by Seeding with SiC Nanoarrays

Novel Synthesis of (hf 0.25 Zr 0.25 Ti 0.25 Ta 0.25 )C-Sic Biphasic Ceramic Micro-Powders Using Single-Source-precursor Route

Single-source-precursor synthesis and characterization of SiAlC(O) ceramics from a hyperbranched polyaluminocarbosilane

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane

A linear polycarbosilane containing <i>m</i>-carborane units: Synthesis and characterization as precursor for SiC/B<sub>4</sub>C ceramics

Polymethylsilane As A Precursor to High-Purity Silicon-Carbide

Preparation and Characterization of Pure SiC Ceramics by High Temperature Physical Vapor Transport Induced by Seeding with Nano SiC Particles

A linear polycarbosilane containing m-carborane units: Synthesis and characterization as precursor for SiC/B4C ceramics

Synthesis and Spinnability of Vinyl-Grafted Carbon Nanotubes /polycarbosilane Precursor with High Ceramic Yield

Digital light processing of SiC ceramic from allylhydridopolycarbosilane with limited acrylate monomers

Single-source-precursor synthesis of dense monolithic SiC/(Ti0.25Zr0.25Hf0.25Ta0.25)C ceramic nanocomposite with excellent high-temperature oxidation resistance

Preparation and Properties of New Zirconium-Containing Silylacetylene Precursor for Ceramic Material