Abstract:Large-size diffraction gratings are essential for pulse compressors in chirped-pulse-amplified high-power laser systems, spectroscopic telescopes, etc. Fabricating large gratings requires large-aperture laser beams with collimated and aberration-free wavefronts. As an alternative a method of making monolithic gratings by optical mosaic has been proposed, which makes multiple-exposures in different areas of a substrate to enlarge the grating size. Between exposures the position and attitude of substrate must be adjusted to minimize the overall wavefront errors, with very tight accuracy requirements (similar to dozens of nanometers and tenths of micro-radians, respectively).We fully utilize the latent fringes (exposed but undeveloped fringes in photoresist) as the core reference object and the exposure beams as the adjustment beams to adjust and lock the position and attitude between consecutive exposures. This approach greatly simplifies the alignment system and eliminates many system errors. However, the diffraction efficiency of a latent grating is extremely weak (similar to 10(-5)) and excessive exposure of the latent fringes during the position and attitude adjustment should be avoided. We overcome these difficulties by carefully blocking stray lights and using a high-sensitivity CCD to monitor the interference fringes of the -1st- and 0th-order latent-fringe diffracted wavefronts. Experimentally we have made 2 x 2 mosaics of (60+28) x (53+30) mm(2) grating area. Typical peak-valley and root-mean-square values of the measured -1st-order diffraction wavefront errors are 0.06 lambda and 0.01 lambda, respectively.The mosaic conditions, detailed alignment steps, and experimental results showing position and attitude controllability will be presented. Important issues of extending the present work to large-size (possibly sub-meter) fabrication will also be discussed.

Fabrication of Sine-Top Broadband Gold-Coated Gratings

Fabrication of broadband, high-efficiency, metal-multilayer-dielectric gratings

Design and analysis of broadband high-efficiency pulse compression gratings

Grating-Assisted Enhanced Optical Transmission Through A Seamless Gold Film

Fabrication of 200nm period gold free-standing transmission gratings based on nanoimprint lithography

Fabrication-friendly High-Efficiency Silicon Nitride Grating Coupler

Fabrication of Large Grating by Monitoring the Latent Fringe Pattern

Low-loss and Low-Crosstalk Si Etched Diffraction Gratings with Multi-Point Iterative Optimization

Optimization and Fabrication of Stitched Long-Period Gratings for Gain Flattening of Ultrawide-Band Edfas

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

High-efficiency, broad-bandwidth metal/multilayerdielectric gratings

Fabrication of high quality chirped fiber Bragg grating by establishing strain gradient

Wear-Resistant Blazed Gratings Fabricated by Etching-Assisted Femtosecond Laser Lithography

Fabrication of Optical Mosaic Gratings by Consecutive Holographic Exposures Employing A Latent-Fringe Based Alignment Technique

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Metal/multilayer-dielectric Coated Grating for Chirped Pulse Amplification Laser System

High-efficiency Metallic Diffraction Gratings for Laser Applications.

Fabrication and Characterization of Long Period Gratings in Air-Core Photonic Bandgap Fibers

The Design, Fabrication and Performance of A Large Area 10000 Line/Mm Metal Transmission Diffraction Gratings for Soft X-Ray

Custom design of large chirped fiber Bragg gratings on application of arbitrary profile filtering

Large-area commercial-grating-quality subwavelength periodic ripples on silicon efficiently fabricated by gentle ablation with femtosecond laser interference via two cylindrical lenses