Abstract:The Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers were prepared using sol-gel process combined with electrospinning. The thermal decomposition and phase inversion process of precursor nanofibers and the effects of calcination temperature and SiO2 content on the phase composition, microstructure, morphology and magnetic property of the resulting nanofibers were studied by means of thermogravimetric and differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy, high resolution transmission electron microscopy and vibrating sample magnetometer. The experimental results show that the cubic spinel structure is basically formed when the precursor nanofibers are calcined at 450 ℃ for 2 h. The average grain size of Ni0.5Zn0.5Fe2O4 contained in the composite nanofibers with 10 % SiO2 and their specific saturation magnetization and coercivity increase with increasing calcination temperature. Amorphous SiO2 additive can effectively restrain the growth of Ni0.5Zn0.5Fe2O4 nanocrystals. As a result, with SiO2 content increasing from 0 to 20 % , the average grain size of Ni0.5Zn0.5Fe2O4 in the prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers calcined at 900 ℃ for 2 h decreases from 81.6 to 13.3 nm, and the specific saturation magnetization of these samples monotonically decreases, whereas the coercivity initially increases and then decreases due to the change of magnetic domain structure from multi-domain to single-domain along with the reduction in grain size. In addition, with the increase of SiO2 content, the diameter of the as-prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers gradually increases and the surface becomes smooth.

Preparation and Characterization of Wire-Liked NiFe2O4 Nanoparticles with High Specific Area and Excellent Magnetic Properties Via a Template-Assembled Sol-Gel Method

Structural and magnetic properties of nickel ferrite nanoparticles synthesized via a template-assisted sol–gel method

Synthesis and Characterization of Nano-sized Cobalt Ferrite Powders with High Specific Area and Magnetic Properties in Template-assisted Sol-gel Method

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Electrospinning Of Fe, Co, And Ni Nanofibers: Synthesis, Assembly, And Magnetic Properties

Size-controlled synthesis and magnetic properties of NiFe2O4 hollow nanospheres via a gel-assistant hydrothermal route

Preparation of One-Dimensional Ni0.5 Zn0.5 Fe2O4/SiO2 Composite Nanostructures and Their Magnetic Properties

Electrospinning Fabrication, Characterization and Magnetic Properties of Co0.5Ni0.5Fe2O4 Nanofibers

Synthesis and Characterisation of Γ-Fe2o3nanowire Arrays Via a Versatile, Simple and Low-Cost Method

Structural, dielectric and magnetic properties of NiFe2O4 prepared via sol–gel auto-combustion method

Structural and Magnetic Properties of Ni1−xZnxFe2O4 (x=0, 0.5 and 1) Nanopowders Prepared by Sol–gel Method

Deposition Feature of Ni Nanoparticles on Halloysite Template and Magnetic Properties of the Composite.

Preparation of Co0.5 Zn0.5 Fe2O4/SiO2 Magnetic Nanocomposites

Structural and Magnetic Properties of Ni0.15Mg0.1Cu0.3Zn0.45Fe2O4 Ferrite Prepared by NaOH-precipitation Method

Magnetic Properties of FeNi3/NiZn-ferrite Nanocomposite Prepared by Hydrothermal Method for Application in High Frequency

Synthesis of CoFe2O4 nanowire arrays by sol–gel template method

Templated fabrication of NiFe2O4 nanorods: Characterization, magnetic and electrochemical properties

Sol–gel-based Chemical Synthesis of NdFeB Hard Magnetic Nanoparticles

Shape-controlled Synthesis of Flake-Like FeNi3 Nanoparticles Based on Sodium Lignosulfonate

Magnetic Properties of Ni Ferrite Nanocrystals Dispersed in the Silica Matrix by Sol–gel Technique

Preparation of NiFe2O4 by Chemical Coprecipitation and Soluble Salt Method