Abstract:Since the high randomness feature of traffic flows, it is challenging to be aware of the spatial-temporal characteristics of dynamic vehicle loads on a long-span bridge. Compared with conventional measuring approaches, computer vision-based techniques have competitive advantages in the measurement of factual vehicle loads parameters, including the passing time, velocity, vehicle type, and corresponding locations on the bridge at each timestamp. In this paper, a vision-based framework for the identifications of dynamic vehicle loads on long-span bridges is proposed. To be specific, the framework consists of two major parts. The first part is the extraction of spatial-temporal factors of vehicles, including the detection of vehicles and the estimation of tracklets. Here, Single Shot Multi-Box Detection (SSD) architecture with MobileNets is utilized for detecting vehicles, while the data association technique with Kalman filter is applied on detection results for generating tracklets. Then, in the second part, based on the detection and tracking results, a Multi-layer Monte Carlo (MLMC) model is developed for axle-load intensities inference and estimation. The learned model is utilized to infer the dynamic load of vehicles from the detection results and generated tracklets. The proposed methodology is validated via an experiment of a case study on the Jiangyin bridge, Jiangsu Province, China, and several spatial-temporal distributions of vehicle loads are specifically analyzed and discussed. Experimental results indicate our proposed framework is a feasible and reliable solution to predict and identify dynamic vehicle loads on long-span bridges, without the assistance of the deck-embedded Weigh-in-Motion (WIM) system.

Vehicle Load Spectrum Simulation of Long-Span Bridges

Site-Specific Fatigue Load Spectrum for Urban Bridges

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Research of Intensified Test on Fatigue Property of Automobile Driving Axle Based on Random Load Spectrum

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Vehicle Load Effect of Long-Span Bridges

A Novel Vision-Based Framework for Identifying Dynamic Vehicle Loads on Long-Span Bridges: A Case Study of Jiangyin Bridge, China

Multi-parameter Dynamic Traffic Flow Simulation and Vehicle Load Effect Analysis based on Probability and Random Theory

Vehicle survey and local fatigue analysis of a highway bridge

Vibration-Induced Probabilistic Fatigue Life Assessment of A Suspension Bridge Carrying Both Railway and Highway Traffic

Measurement-Based Vehicle Load Model for Urban Expressway Bridges

A bridge weigh-in-motion method of motorway bridges considering random traffic flow based on long-gauge fibre Bragg grating sensors

WIM-based vehicle load models for urban highway bridge

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

Investigation of Highway Bridge Load Effect for Fatigue Reliability Analysis

Analysis of Response Spectrum for Random Pedestrian Loads

Statistical Analysis of Stress Spectra for Fatigue Life Assessment of Steel Bridges with Structural Health Monitoring Data

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements