Abstract:To study the energy evolution law and damage constitutive behavior of high-strength concrete based on the conventional triaxial compression tests of C60 and C70 high-strength concrete subjected to five different confining pressures, the failure characteristics of high-strength concrete are analyzed at different confining pressures, and the evolution of the input energy density, elastic strain energy density, and dissipation energy density with axial strain and confining pressure are quantified. Combined with a continuous damage theory and non-equilibrium statistical method, the ratio of dissipation energy density of concrete to dissipation energy density corresponding to peak stress is used as the mechanical parameter. Assuming that the mechanical parameter obeys the Weibull distribution laws, the statistical damage variable describing the damage characteristics of concrete were derived. According to the Lemaitre strain equivalent principle, the damage variable is introduced to the generalized Hooke law to establish the statistical damage constitutive model for high-strength concrete. The results show that: (1) the input energy density and dissipation energy density increases with the increase of axial strain, while the elastic strain energy density increases first and then decreases as a function of the axial strain and reaches the maximum value at the peak stress; (2) the input, elastic strain, and dissipated energy densities corresponding to the peak stress of the two high-strength concretes all increase as a function of confining pressure, and the elastic strain energy density corresponding to the peak stress increases linearly as a function of the confining pressure; (3) the statistical damage constitutive model results of C60 and C70 high-strength concrete are in good agreement with the test results, and the average relative standard deviations are only 3.64% and 3.99%. These outcomes verify the rationality and accuracy of the model.

Experimental Study on the Fatigue Damage of High Strength Concrete under Uniaxial Compression

Study on Flexural Fatigue Life of Ultra-High Toughness Cementitious Composites under Constant Amplitude Cyclic Loading

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

A New Approach for Studying Fatigue Damage

Damage Degradation of Concrete Due to Compressive Fatigue Loading

Numerical Method for Creep Analysis of Strengthened Fatigue-Damaged Concrete Beams

Behavior of Concrete under Nonproportional Biaxial Fatigue Stresses with One Constant

DAMAGE MODEL FOR COMPRESSION FATIGUE LOADING OF CONCRETE WITH UNIAXIAL LATERAL CONFINEMENT

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

DAMAGE MODEL FOR TENSION-COMPRESSION FATIGUE LOADING OF CONCRETE AND ITS VERIFICATION

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Experimental Study On Flexural Fatigue Property Of Ultra-High Toughness Cementitious Composites

Flexural Fatigue Damage Model Of Ultra-High Toughness Cementitious Composites On Base Of Continuum Damage Mechanics

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Deformation Calculation Of Ultra-High Toughness Cementitious Composite-Concrete Beam Under Flexure Fatigue With Ultra-High Toughness Cementitious Composite Fatigue Damage Model

Damage constitutive of concrete under uniaxial alternate tension?compression fatigue loading based on double bounding surfaces

Damage Constitutive for High Strength Concrete in Triaxial Cyclic Compression

Statistical Damage Constitutive Model for High-Strength Concrete Based on Dissipation Energy Density

Fatigue Strain and Damage Analysis of Concrete in Reinforced Concrete Beams under Constant Amplitude Fatigue Loading

Moisture transports in high-cycle compressive fatigue-damaged concrete