Abstract:To study the energy evolution law and damage constitutive behavior of high-strength concrete based on the conventional triaxial compression tests of C60 and C70 high-strength concrete subjected to five different confining pressures, the failure characteristics of high-strength concrete are analyzed at different confining pressures, and the evolution of the input energy density, elastic strain energy density, and dissipation energy density with axial strain and confining pressure are quantified. Combined with a continuous damage theory and non-equilibrium statistical method, the ratio of dissipation energy density of concrete to dissipation energy density corresponding to peak stress is used as the mechanical parameter. Assuming that the mechanical parameter obeys the Weibull distribution laws, the statistical damage variable describing the damage characteristics of concrete were derived. According to the Lemaitre strain equivalent principle, the damage variable is introduced to the generalized Hooke law to establish the statistical damage constitutive model for high-strength concrete. The results show that: (1) the input energy density and dissipation energy density increases with the increase of axial strain, while the elastic strain energy density increases first and then decreases as a function of the axial strain and reaches the maximum value at the peak stress; (2) the input, elastic strain, and dissipated energy densities corresponding to the peak stress of the two high-strength concretes all increase as a function of confining pressure, and the elastic strain energy density corresponding to the peak stress increases linearly as a function of the confining pressure; (3) the statistical damage constitutive model results of C60 and C70 high-strength concrete are in good agreement with the test results, and the average relative standard deviations are only 3.64% and 3.99%. These outcomes verify the rationality and accuracy of the model.

Damage Constitutive for High Strength Concrete in Triaxial Cyclic Compression

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Dynamic Damage Constitutive Model of Concrete in Uniaxial Tension

Damage constitutive of concrete under uniaxial alternate tension?compression fatigue loading based on double bounding surfaces

Statistical Damage Constitutive Model for High-Strength Concrete Based on Dissipation Energy Density

An enhanced damaged plasticity model for concrete under cyclic and monotonic triaxial compression

Damage Degradation of Concrete Due to Compressive Fatigue Loading

A Damage Model of Concrete including Hysteretic Effect under Cyclic Loading

A damage constitutive model for concrete under uniaxial compression capturing strain localization

High-Strength Concrete Subjected to Triaxial Compression

An elastoplastic damage model of concrete under cyclic loading and its numerical implementation

DAMAGE MODEL FOR TENSION-COMPRESSION FATIGUE LOADING OF CONCRETE AND ITS VERIFICATION

An enhanced damage plasticity model for predicting the cyclic behavior of plain concrete under multiaxial loading conditions

A Constitutive Model of Expansive Concrete and Steel Fiber-Reinforced Expansive Concrete under Tri-axial Compression

DAMAGE MODEL FOR COMPRESSION FATIGUE LOADING OF CONCRETE WITH UNIAXIAL LATERAL CONFINEMENT

Mesoscale Modelling of Concretes Subjected to Triaxial Loadings: Mechanical Properties and Fracture Behaviour

Research on Constitutive Model on Dynamical Damage to Concrete Under Condition of Direct Tensile

A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads

An improved constitutive model for steel tube-confined ultra-high-strength concrete

Effect of Stress Path on the Damage Properties of Concrete under High Pressure