Abstract:In this study, a detailed predictive numerical modeling technique is developed for three different kinds of hybrid and non-hybrid architectures of 3D woven orthogonal composites. A unit cell, full finite element meso model, is developed to simulate the elastic and damage progression behavior under uni-axial compression. Material systems for 3D woven Composites used in this study are Carbon/epoxy, Kevlar epoxy, and Hybrid formulation. The geometry of the constituents of the unit cell, fiber tows, and matrix, was determined through the microscopic analysis of the woven structures. The unit cell model used an idealized geometry without incorporating the fiber undulation which is a pervasive effect during the weaving process of 3D woven composites. Abaqus standard solver and a UMAT code incorporating the damage model within Abaqus was used to compute the deformation of the unit cell under in-plane compression loading. Moreover, determining the effect of void contents on the mechanical properties of the material, Balshin’s empirical equation was used to calibrate the input material parameters. The results from the numerical analysis are then compared with the experimental results and it is found that the predicted elastic modulus and compressive strength for all three types of architecture are in good agreement with the experimental results. Overall, the unit cell meso model furnished fairly accurate estimation of the compressive properties of 3D woven composites for different material systems with consideration of void contents.

Multi-scale Structure Modeling of Damage Behaviors of 3D Orthogonal Woven Composite Materials Subject to Quasi-Static and High Strain Rate Compressions

Progressive failure analysis of 2D woven composites at the meso-micro scale

Multi-scale Structure Finite Element Analyses of Damage Behaviors of Multi-Axial Warp-Knitted Composite Materials Subjected to Quasi-Static and High Strain Rate Compressions

Meso-Scale Damage Modeling of Hybrid 3D Woven Orthogonal Composites under Uni-Axial Compression

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Multiscale Progressive Damage Model for Plain Woven Composites

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

Multi-scale Damage Modeling of 3D Orthogonal Woven Carbon-Carbon Composite at Elevated Temperatures

Multiscale Modeling of Mechanical Behavior and Failure Mechanism of 3D Angle-Interlock Woven Aluminum Composites Subjected to Warp/weft Directional Tension Loading

A Progressive Damage Model For 3d Woven Composites Under Compression

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Micromechanics-based Multiscale Progressive Failure Simulation of 3D Woven Composites under Compressive Loading with Minimal Material Parameters

Multiscale numerical investigation on failure behaviour of three-dimensional orthogonal woven carbon/carbon composites subjected to pin-loading

Multiscale Study on Compressive Failure Mechanism of Plain Woven Composites Considering Stochastic Waviness Defects

A Multiscale Method Across Three Length Scales for Progressive Damage Analysis of Plain Woven Composites

Multi-Scale Progressive Damage Model for Analyzing the Failure Mechanisms of 2D Triaxially Braided Composite under Uniaxial Compression Loads

Experimental and Numerical Analyses of the Mechanical Behaviors of Three-Dimensional Orthogonal Woven Composites under Compressive Loadings with Different Strain Rates

Tensile impact damage behaviors of co-woven-knitted composite materials with a simplified microstructure model

Multiscale Modeling of the Mechanical Behavior of 3D Braided CFRP Composites under Uniaxial Tension