Abstract:In this work, a commercial magnesium alloy, AZ31B in hot-rolled condition, has been subjected to severe plastic deformation via four passes of equal channel angular pressing (ECAP) to modify its microstructure. Electron backscatter diffraction (EBSD) was used to characterize the microstructure of the as-received, ECAPed and mechanically loaded specimens. Mechanical properties of the specimens were evaluated under both compression and tension along the rolling/extrusion direction over a wide range of strain rates. The yield strength, ultimate strength and failure strain/elongation under compression and tension were compared in detail to sort out the effects of factors in terms of microstructure and loading conditions. The results show that both the as-received alloy and ECAPed alloy are nearly insensitive to strain rate under compression, and the stress strain curves exhibit clear sigmoidal shape, pointing to dominance of mechanical twinning responsible for the plastic deformation under compression. All compressive samples fail prematurely via adiabatic shear banding followed by cracking. Significant grain size refinement is identified in the vicinity of the shear crack. Under tension, the yield strength is much higher, with strong rate dependence and much improved tensile ductility in the ECAPed specimens. Tensile ductility is even much larger than the malleability under compression. This supports the operation of < c + a > dislocations. However, ECAP lowers the yield and flow strengths of the alloy under tension. We attempted to employ a mechanistic model to provide an explanation for the experimental results of plastic deformation and failure, which is in accordance with the physical processes under tension and compression. (C) 2015 Elsevier Ltd. All rights reserved.

Microstructure and Mechanical Behavior of Ecap Processed Az31b over A Wide Range of Loading Rates under Compression and Tension

Mechanical Properties and Microstructure of AZ31B Magnesium Alloy Processed by I-ECAP

Fracture Mechanism of AZ31 Magnesium Alloy Processed by Equal Channel Angular Pressing Comparing Three Point Bending Test and Tensile Test

Quasi-Static and Dynamic Compressive Properties of AZ31 Magnesium Alloy Processed by Equal Channel Angular Pressing

Microstructure and Mechanical Properties of AZ31 Mg Alloy Processed by Equal Channel Angular Pressing (ECAP)

Equal-Channel Angular Pressing of Magnesium Alloy Az91 and Its Effects on Microstructure and Mechanical Properties

Experimental and Numerical Investigation on Pure Aluminum by ECAP

Dynamic Deformation Behavior of ECAPed AZ31 Magnesium Alloy

Microstructure, texture, and instability during superplastic deformation of ECAP-treated AZ31 Mg alloy

Microstructure and mechanical properties of AZ61 alloys with large cross-sectional size fabricated by multi-pass ECAP

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

Mechanical Properties and Failure of ECAE Processed Mg97Y2Zn1 at Different Strain Rates

Hardness Homogeneity and Micro-Tensile Behavior in a Magnesium AZ31 Alloy Processed by Equal-Channel Angular Pressing

Micro-Tensile Behavior at a High Temperature in an AZ31 Magnesium Alloy Processed by ECAP

Effects of Die Angle on Microstructures and Mechanical Properties of AZ31 Magnesium Alloy Processed by Equal Channel Angular Pressing

Microstructure and Mechanical Properties of Magnesium Alloy AZ31 Processed by Compound Channel Extrusion

Microstructure and Properties of AZ31 Magnesium Alloy with ECAP

Study of a Fine-Grained AZ31 Magnesium Alloy Prepared by Equal Channel Angular Pressing

Microstructure and Mechanical Properties of Equalchannel Angular Pressed AZ31 Magnesium Alloy

Microstructure and Mechanical Properties of AA6082-T6 by ECAP under Warm Processing

Improvement on Dynamic Fracture Properties of Magnesium Alloy AZ31B Through Equal Channel Angular Pressing