Abstract:Reactivity enhancement is crucial for the potential applications of ammonia (NH3) as a gas turbine fuel. Doping more reactive fuels like H2, methane and syngas is a widely adopted strategy in this field, however fundamental combustion studies of NH3/reactive fuel mixtures under gas turbine-relevant high pressure conditions are still very limited. This work reports an effort to study laminar flame propagation of NH3/syngas mixtures up to 10 atm. Laminar burning velocities (LBVs) of NH3/syngas/air mixtures were measured at 298 K, various syngas contents in fuel mixtures (α) and H2 contents in syngas (β), and equivalence ratios of 0.7–1.5 in a high-pressure constant-volume cylindrical combustion vessel. A kinetic model was developed for NH3/syngas combustion based on our recent NH3 model and a recent syngas model in literature. It shows reasonable predictions on the present NH3/syngas LBVs at 1–10 atm, as well as previous data including NH3/syngas LBVs at 1 atm, NH3/syngas ignition delay times at various pressures and pure NH3 LBVs at various pressures. Modeling analysis including the sensitivity analysis and rate of production analysis provides kinetic interpretation for the effects of fuel composition (α and β), equivalence ratio and pressure on NH3/syngas LBVs. It is found that the addition of syngas shifts the chemistry from NH3 sub-mechanism to syngas sub-mechanism. A modified fictitious diluent gas method was proposed to separate the chemical and thermal effects of syngas addition, which shows that the chemical effect is more responsible for the enhanced laminar flame propagation. NH3/syngas/air flames have similar reaction networks but different preferred pathways under lean and rich conditions. Compared with pure NH3 flames, the addition of syngas also improves the importance of H + O2 (+ M) = HO2 (+ M) and consequently leads to strong pressure dependency of NH3/syngas/air flames.

Syngas Spark Ignition Behavior at Simulated Gas Turbine Startup Conditions

Effect of Spark Timing on the Combustion Stages Seen in a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

Experimental Investigations of Spark Ignition in A Model Combustor with Synthesis Gas

Experimental Investigation of Ignition Characteristics of Non-premixed Syngas Flames

Combustion of Premixed Ammonia and Air Initiated by Spark- Ignited Micro-gasoline-jet in a Constant Volume Combustible Vessel

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Observation of Flame Propagation in a Heavy-Duty Natural-Gas Lean Burn Spark-Ignition Engine

Fundamental combustion characteristics of syngas

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Effects of Syngas Addition on Combustion Characteristics of Gasoline Surrogate Fuel

Combustion characteristics of ignition processes for lean premixed swirling combustor under visual conditions

Large eddy simulation of n-heptane/syngas pilot ignition spray combustion: Ignition process, liftoff evolution and pollutant emissions

Shock Tube Study of Ignition-Delay Measurements and Kinetic Mechanism Research for Syngas

Experimental Studies of the Startup Characteristics of Premixed Combustion of Natural Gas in the Gradually-Varied Porous Media

Kinetics Modeling on NOx Emissions of a Syngas Turbine Combustor Using Rich-Burn, Quick-Mix, Lean-Burn Combustion Method

Effect of fuel type on the MILD combustion of syngas

Autoignition and Flame Lift-off Behavior of a Fuel Jet Mixing with Turbulent Hot Air Coflow

Exploration on laminar flame propagation of ammonia and syngas mixtures up to 10 atm

Analyzing the Combustion Oscillation of a Gas Turbine for Syngas Based on the Characteristic Time-Scale Theory

Flow, combustion and species fields of premixed CH 4 /H 2 /CO syngas oxy-flames on a swirl burner: Effects of syngas composition