High spatiotemporal resolution optical measurements of two-stage ignition and combustion in Engine Combustion Network Spray D flames
Hyung Sub Sim,Lukas Weiss,Noud Maes,Lyle M. Pickett
DOI: https://doi.org/10.1016/j.csite.2024.105192
IF: 6.268
2024-09-30
Case Studies in Thermal Engineering
Abstract:This study explores flame structures and combustion dynamics in high-pressure n-dodecane fuel sprays, focusing on the formation and consumption of formaldehyde (CH 2 O) during autoignition and the development of poly-aromatic hydrocarbons (PAH) as soot precursors. These processes are crucial for optimizing combustion efficiency and reducing emissions. However, traditional approaches, which rely on single-shot measurements or ensemble-averaged visualizations, often overlook critical early-stage processes during low-temperature ignition. To overcome these challenges, we employed an innovative high-speed planar laser-induced fluorescence (PLIF) technique at 50 kHz using a pulse-burst Nd:YAG laser system with an excitation wavelength of 355 nm. This approach, applied for the first time to Engine Combustion Network (ECN) Spray D flames, provides unprecedented insights into the combustion processes at varying ambient temperatures and oxygen concentrations. Additionally, simultaneous high-speed schlieren imaging at 100 kHz was used to visualize spray penetration, first-stage ignition, and thermal expansion zones. Our findings reveal that, similar to Spray A flames, CH 2 O forms in cold, fuel-rich zones well upstream of the combustion zone. However, in Spray D flames, the schlieren signal softening observed in the jet's head does not lead to complete disappearance, and the CH 2 O signal is absent from the full head of the spray. During the second-stage ignition, CH 2 O consumption accelerates due to high-temperature reactions, leading to a significant reduction in its signal. Unlike the mushroom-shaped structure seen in Spray A flames, Spray D flames exhibit a quasi-steady PAH phase structure, with lean peripheral mixtures insufficient for soot precursor formation. Notably, reducing ambient oxygen concentration to 13 % while maintaining or increasing temperature prolongs the presence of CH 2 O, highlighting its influence on ignition dynamics and oxidation processes in dodecane spray flames. This study provides new insights into the combustion mechanisms of high-pressure sprays and offers valuable data for developing next-generation combustion technologies, including models, aimed at improving efficiency and reducing emissions.
thermodynamics