Abstract:Exposure of turbine blades to cyclic torsional loading at high temperature, stemming from pre‐torque installation and the aerodynamic forces during operation, has the potential to induce substantial creep–fatigue damage, thereby contributing to the likelihood of premature failure. Investigating the deformation mechanisms and proposing a reliable life prediction method aiming at torsional loading is critical to ensure the structural integrity of turbine blades. This study conducted strain‐controlled fatigue and creep–fatigue tests on Inconel 718 superalloy, employing a multiaxial servo‐hydraulic testing machine. Electron backscattering diffraction elucidated deformation and damage mechanisms, forming a basis for subsequent constitutive modeling and life prediction. The lack of creep–fatigue mechanical behavior and microscopic failure mechanism when stress triaxiality equal to 0 is filled, which provides the theoretical basis and data support for the life design and damage assessment of this material under extreme service conditions. The unified viscoplasticity constitutive model effectively characterized macroscopic deformation under torsional loading. Prediction of creep–fatigue life under torsional loading, utilizing the multiaxial ductility factor‐modified strain energy density exhaustion model, demonstrated excellent alignment with experimental findings. Finally, parametric analyses of stress distribution and damage assessment under different conditions were carried out for the example of a turbine blade with relatively rarely considered aerodynamic loading as a variable. It is expected to be popularized and applied in life design and damage assessment of high‐temperature structures under multiaxial loading in engineering.

Analysis of Multi-Axial Creep–Fatigue Damage on an Outer Cylinder of a 1000 MW Supercritical Steam Turbine

Multiaxial Creep-Fatigue Life Prediction on the Rotor of a 1000MW Supercritical Steam Turbine

Application of A Creep-Damage Constitutive Model for the Rotor of A 1000mw Ultrasupercritical Steam Turbine

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

Continuum Damage Mechanics-Based Analysis of Creep–fatigue Interaction Behavior in a Turbine Rotor

The Multiaxial Creep Strength Analysis Coupling with Damage Evolution for 3D Innercasing of the USC Turbine System

Multi-axial Creep-Fatigue Analysis of a Cracked Groove Structure Subjected to Cyclic Thermal Loading

Analysis Of High Temperature Creep On The Nut Connection Components Of A 600mw Supercritical Steam Turbine

Study of Creep-Fatigue Behavior in A 1000 Mw Rotor Using A Phenomenological Lifetime Model

Influence of High-Temperature Dwell Time on Creep-Fatigue Behavior in A 1000 Mw Steam Turbine Rotor

Numerical Analysis of Fatigue Life Improvement by Optimizing the Startup Phase for a 1000 MW Supercritical Steam Turbine Inner Casing

Creep Continuum Damage Analysis for a Pressurized Thick Wall Circumferentially Welded CrMoV Steel Pipe at 640°C

Influence Of Creep On Low-Cycle Fatigue Life Assessment Of Ultra-Supercritical Steam Turbine Rotor

Study of Creep–fatigue Behavior in a 1000 MW Rotor Using a Unified Viscoplastic Constitutive Model with Damage

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Multi-Scale Fatigue–creep Coupled Damage Model for Steel Structures under Extreme Cyclic Loading and Temperature

Numerical Investigation of Creep–Fatigue Behavior in a Steam Turbine Inlet Valve under Cyclic Thermomechanical Loading

Multiaxial creep–fatigue failure mechanism and life prediction of a turbine blade based on a unified numerical solution approach

Multiaxial Creep Strength Design for High Temperature Components in Coal-Fired Power Plants

Anisotropic Damage Model under Continuum Slip Crystal Plasticity Theory for Single Crystals

A Continuum Damage Mechanics Model on Creep Rupture Life Assessment of a Steam Turbine Rotor