Abstract:Creep rupture assessment is a significant issue in the field of high-temperature structural integrity. In this paper, the creep rupture assessment of 3D pressure pipelines with volumetric defects subjected to cyclic thermo-mechanical loadings is done using a direct numerical approach within the framework of stress compensation method (SCM). For calculation of creep rupture limit, an extended shakedown analysis scheme with yield strength correction is essentially performed, where the revised yield strength is determined as the minimum of the plastic yield strength and the creep rupture strength of material corresponding to a specified elevated temperature and rupture time. This direct numerical approach performs the creep rupture assessment by using the given creep rupture data of material rather than simulating the degenerative process of material based on creep damage constitutive equations under a specified loading history. The numerical approach is incorporated into commercial finite element software of Abaqus. Parametric studies on geometric dimensions of part-through slot affecting the creep rupture limit of 3D pressure pipelines with volumetric defects are conducted. Numerical results shown in this study indicate that the direct numerical approach accurately identifies the creep rupture limit boundary of the pressure pipeline, verified by the elastic-plastic cycle-by-cycle analysis. Failure mechanisms, such as local creep rupture, global creep rupture and global plastic rupture are detected under different loading combinations. These results give the helpful information for in-service integrity assessment of defective pressure pipelines at elevated temperature, and demonstrate the applicability and application prospect of the direct numerical approach in solving questions relevant to design or life assessment of other engineering structures.

The Multiaxial Creep Strength Analysis Coupling with Damage Evolution for 3D Innercasing of the USC Turbine System

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

A Phase-Field Model for Creep Behavior in Nickel-Base Single-Crystal Superalloy: Coupled with Creep Damage

Multiaxial creep–fatigue failure mechanism and life prediction of a turbine blade based on a unified numerical solution approach

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Numerical investigation on the creep damage induced by void growth in heat affected zone of weldments

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A life prediction method and damage assessment for creep-fatigue combined with high-low cyclic loading

An integrated unified elasto-viscoplastic fatigue and creep damage model with characterization method for structural analysis of nickel-based high-temperature structure

Creep Rupture Limit Analysis for Engineering Structures under High-Temperature Conditions

Numerical Schemes Based on the Stress Compensation Method Framework for Creep Rupture Assessment

Numerical Simulation of Creep Damage and Life Prediction of Superalloy Turbine Blade

System-level creep-fatigue reliability evaluation by engineering damage mechanics incorporating cumulative damage-damage threshold interference

A Runge-Kutta-Merson Algorithm Forcreep Damage Analysis of High Temperature Components

Application of Runge–Kutta–Merson algorithm for creep damage analysis

Multi-scale analysis and experimental research for turbine guide vanes made of 2D braided SiCf/SiC composites in high-cycle fatigue regime

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

Investigation of creep-fatigue crack initiation by using an optimal dual-scale modelling approach

Creep Rupture Assessment of Cyclically Heated 3D Pressure Pipelines with Volumetric Defects Using a Direct Numerical Approach