Abstract:Detecting abnormal changes in bridge behavior is essential for bridge management. Influence lines are a generally accepted method to describe the quasi-static bridge behavior. Researchers have proposed that the ratio between the influence lines associated structural strains for a pair of sensors can be used as an indicator of abnormal structural condition. However, these methods have been developed for highway bridges; direct application to railway bridges is challenging, because (i) measured responses corresponding to each axle load are coupled, and (ii) train-induced longitudinal forces and bearing restraint produce additional strains in structural members. This research seeks to resolve these challenges to enable application to long-span railway bridges with spherical bearings. First, the concept of influence lines is illustrated using the elastic beam theory, providing an understanding of the underlying mechanisms of the train-induced responses. Accordingly, two condition in-dicators base on the axial strain in a pair of structural members are given (i.e., the ratio between integral areas of pseudo-static strains and the ratio between average pseudo-static strain amplitude). In addition, the statistical patterns of the indicators are studied using numerical simulation. Subsequently, the strain patterns are illustrated for field monitoring data from a long-span steel truss railway bridge. Herein, the calculations for the condition indicators from strain measurements are presented, and the pre-processing of the indicators is conducted to consider bridge bearing properties. Results show that the condition indicators are naturally clustered according to tracks and the directions of two consecutive trains; each cluster can be represented using a normal distri-bution. Note that these distributions do not change with the variation of train loads (i.e., train weight and train speed). The recognized pattern provides a potential approach for the identification of abnormal behavior of railway bridges.

Condition assessment for high-speed railway bridges based on train-induced strain response

Condition Assessment for High-Speed Railway Bridges Based on Vibration Response Caused by Vehicles

Investigation on the Pattern for Train-Induced Strains of the Long-Span Steel Truss Railway Bridge

Investigation on vibration behavior of a high-speed railway bridge based on monitoring data

Identification of Moving Train Loads on Railway Bridge Based on Strain Monitoring

Structural damage identification for railway bridges based on train-induced bridge responses and sensitivity analysis

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Distributed Stiffness Assessment of Bridges Based on Macro-Strain Envelope Curve under Moving Trainloads

Damage Diagnosis Method for Railway Bridges Based on Train Dynamic Responses

Unsupervised Stiffness Evaluation of High-Speed Railway Bridges Using Periodic Monitoring Data

DAMAGE DETECTION OF BRIDGES BASED ON TRAIN-INDUCED BRIDGE RESPONSE AND SENSITIVITY ANALYSIS

Damage Detection of Spatial Track–Bridge System with Interlayer Connection Using High-Speed Train Response and Sensitivity Analysis

Condition Monitoring and Quantitative Evaluation of Railway Bridge Substructures Using Vehicle-Induced Vibration Responses by Sparse Measurement

Statistical Running Safety Analysis of High-Speed Trains on Beam Bridges after Long-Term Service

Early Warning of Abnormal Train-Induced Vibrations for a Steel-Truss Arch Railway Bridge: Case Study

Bridge Stress Calculation Based on the Dynamic Response of Coupled Train–bridge System

Performance Warning of Bridges under Train Actions Through Equivalent Frequency Response Functions

Fatigue life prediction for high-speed railway bridges by reconstructing monitoring-based dynamic stress

Strain-Based Damage-Assessment Method for Bridges under Moving Vehicular Loads Using Long-Gauge Strain Sensing

Analysis of Strain Responses of Long Span Steel Truss Arch Bridge Under Action of High-Speed Trains

Data-driven Structural Condition Assessment for High-Speed Railway Bridges Using Multi-Band FIR Filtering and Clustering