Abstract:Detecting abnormal changes in bridge behavior is essential for bridge management. Influence lines are a generally accepted method to describe the quasi-static bridge behavior. Researchers have proposed that the ratio between the influence lines associated structural strains for a pair of sensors can be used as an indicator of abnormal structural condition. However, these methods have been developed for highway bridges; direct application to railway bridges is challenging, because (i) measured responses corresponding to each axle load are coupled, and (ii) train-induced longitudinal forces and bearing restraint produce additional strains in structural members. This research seeks to resolve these challenges to enable application to long-span railway bridges with spherical bearings. First, the concept of influence lines is illustrated using the elastic beam theory, providing an understanding of the underlying mechanisms of the train-induced responses. Accordingly, two condition in-dicators base on the axial strain in a pair of structural members are given (i.e., the ratio between integral areas of pseudo-static strains and the ratio between average pseudo-static strain amplitude). In addition, the statistical patterns of the indicators are studied using numerical simulation. Subsequently, the strain patterns are illustrated for field monitoring data from a long-span steel truss railway bridge. Herein, the calculations for the condition indicators from strain measurements are presented, and the pre-processing of the indicators is conducted to consider bridge bearing properties. Results show that the condition indicators are naturally clustered according to tracks and the directions of two consecutive trains; each cluster can be represented using a normal distri-bution. Note that these distributions do not change with the variation of train loads (i.e., train weight and train speed). The recognized pattern provides a potential approach for the identification of abnormal behavior of railway bridges.

Investigation on the Pattern for Train-Induced Strains of the Long-Span Steel Truss Railway Bridge

Identification of Moving Train Loads on Railway Bridge Based on Strain Monitoring

Condition assessment for high-speed railway bridges based on train-induced strain response

Investigation on vibration behavior of a high-speed railway bridge based on monitoring data

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Early Warning of Abnormal Train-Induced Vibrations for a Steel-Truss Arch Railway Bridge: Case Study

Analysis of Strain Responses of Long Span Steel Truss Arch Bridge Under Action of High-Speed Trains

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Temperature Effects on Strain Influence Lines and Dynamic Load Factors in a Steel-Truss Arch Railway Bridge Using Adaptive FIR Filtering

Distributed Stiffness Assessment of Bridges Based on Macro-Strain Envelope Curve under Moving Trainloads

Structural behavior analysis of a continuous steel truss arch railway bridge integrating monitoring data

Statistical Running Safety Analysis of High-Speed Trains on Beam Bridges after Long-Term Service

Train-induced dynamic behavior analysis of longitudinal girder in cable-stayed bridge

Strain features and condition assessment of orthotropic steel deck cable-supported bridges subjected to vehicle loads by using dense FBG strain sensors

Identifying structural properties of a steel railway bridge for structural health monitoring using laser Doppler vibrometry

Real-time Bayesian axle load estimation and structural identification of railway bridges under train loads based on strain monitoring

Influence of spatial track alignment of long-span arch bridge on train operational stability

Behavior Analysis and Early Warning of Girder Deflections of a Steel-Truss Arch Railway Bridge under the Effects of Temperature and Trains: Case Study

Investigation of longitudinal movements of girder ends considering various longitudinal non-linear resistances in railway suspension bridges

Damage Identification and Bearing Capacity Evaluation of Bridges Based on Distributed Long-Gauge Strain Envelope Line under Moving Vehicle Loads

Stress Influence Line Identification of Long Suspension Bridges Installed with Structural Health Monitoring Systems