Abstract:Structural health monitoring of bridges based on train-induced vibrations has attracted extensive attention and takes advantage of the high-magnitude and regularly spaced features of trainloads. However, the monitoring process is restricted because the relationship between bridge characteristics and the dynamic features of train-induced vibration responses is not well represented. In this study, train-induced acceleration characteristics of a bridge are investigated, and the relationship between the train speed and spectral amplitude of the bridge acceleration at a frequency equal to the ratio of the speed to carriage length is revealed. Based on the phenomenon that the speed-amplitude correlation trend is consistent with the structural frequency response function (FRF), a dynamic index called the equivalent frequency response function (EFRF) is proposed. The evolution rules of the EFRF curve with varying natural frequencies and train loads are distinguished, and the structural performance variation can be determined according to the relationship between the structural stiffness, natural frequencies, and EFRF. Because the speed-amplitude points are scattered due to the train configuration parameters and measurement noise, the EFRF curve should be fitted first. In addition, the normal fluctuation in the speed-amplitude points is limited using the local Shewhart control chart, considering the heteroscedasticity of the speed-amplitude points. Then, speed-amplitude points that exceed the control limits are used to identify abnormal train-induced vibrations. Finally, the monitoring data for a railway bridge with multiple lanes are considered to verify the proposed method. The results show that the abnormal train-induced vibration warning based on speed-amplitude points have a similar performance to that based on the speed-acceleration correlation, but the causes of the abnormal vibration can be identified explicitly only with the speed-amplitude correlation.

Unsupervised Stiffness Evaluation of High-Speed Railway Bridges Using Periodic Monitoring Data

Condition Assessment for High-Speed Railway Bridges Based on Vibration Response Caused by Vehicles

Condition assessment for high-speed railway bridges based on train-induced strain response

Distributed Stiffness Assessment of Bridges Based on Macro-Strain Envelope Curve under Moving Trainloads

Assessing running safety of high-speed trains on long-span cable-stayed bridges based on in-situ monitoring data

Fatigue life prediction for high-speed railway bridges by reconstructing monitoring-based dynamic stress

Representation of In-Service Performance for Cable-Stayed Railway–Highway Combined Bridges Based on Train-Induced Response’s Sensing Data and Knowledge

Assessment and prediction of high speed railway bridge long-term deformation based on track geometry inspection big data

Identifying structural properties of a steel railway bridge for structural health monitoring using laser Doppler vibrometry

Evaluation of High-Speed Railway Bridges Based on a Nondestructive Monitoring System

Rapid assessment of suspension bridge deformation under concentrated live load considering main beam stiffness: An analytical method

A Dynamic Assessment Method for Service Performance of Railway Bridge Substructures Based on Linear Stiffness Identification

Statistical Running Safety Analysis of High-Speed Trains on Beam Bridges after Long-Term Service

Investigation on vibration behavior of a high-speed railway bridge based on monitoring data

Study on the Stiffness and Dynamic Characteristics of a Bridge Approach Zone: Tests and Numerical Analyses

Analytical evaluation of the influence of vertical bridge deformation on HSR longitudinal continuous track geometry

Performance Warning of Bridges under Train Actions Through Equivalent Frequency Response Functions

Vertical stiffness limit of 400 km/h high-speed railway simple-supported bridge considering excitation randomness

Fatigue-Life Evaluation of A High-Speed Railway Bridge with an Orthotropic Steel Deck Integrating Multiple Factors

Dynamic Deflection Monitoring of High-Speed Railway Bridges with the Optimal Inclinometer Sensor Placement

Stiffness Monitoring and Damage Assessment of Bridges under Moving Vehicular Loads Using Spatially-Distributed Optical Fiber Sensors