Abstract:The increasing demand for high-performance aircraft engines has led to a greater emphasis being placed on advanced sealing coating technologies. Developing long-life, self-lubricating, and wear-resistant coatings is of significant research value. This study focuses on the fabrication of a novel self-lubricating and wear-resistant NiCoCrAlY-Cr2O3-AgMo composite coating. This coating was deposited onto a GH4169 substrate utilizing plasma spraying. Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) and X-ray diffraction (XRD) methods were employed to characterize the elemental composition and microstructure of the fabricated NiCoCrAlY-Cr2O3-AgMo composite coating. Microhardness measurements across the coating cross-section indicated a gradual increase in hardness from the GH4169 substrate to the NiCoCrAlY-Cr2O3-AgMo coating. The average hardness of the GH4169 substrate was 413.92 HV0.2, while the CoNiCrAlY bonding layer region exhibited an average hardness of 467.60 HV0.2. The NiCoCrAlY-Cr2O3-AgMo coating itself demonstrated an average microhardness of 643.22 HV0.2. Room temperature friction tests indicated that the average coefficient of friction (COF) of the GH4169 substrate was 0.665. In contrast, the NiCoCrAlY-Cr2O3-AgMo coating exhibited a significantly lower average COF of 0.16, representing a 75.94% reduction compared to the uncoated GH4169 substrate. High-temperature friction tests were conducted at 400 °C, 500 °C, and 600 °C, indicating average COF values of 0.438, 0.410, and 0.268, respectively, for the NiCoCrAlY-Cr2O3-AgMo coating. Specifically, at 600 °C, the formation of a lubricious NiMoO4 tribofilm on the coating surface was observed. This tribofilm effectively reduced the wear rate of the GH605 pin to 2.78 × 10−6 mm3/N·m, highlighting the potential of the NiCoCrAlY-Cr2O3-AgMo coating to reduce wear in high-temperature sliding contact applications.

Textured Hybrid Nanocomposite Coatings for Surface Wear Protection of Sports Equipment

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Designed Fabrication of Hard Cr Cr2O3Cr7C3 Nanocomposite Coatings for Anti-Wear Application

Picosecond laser-textured WC-10Co4Cr metal-ceramic composite coatings with high wear resistance property

Enhanced Mechanical and Tribological Capabilities of a Silicon Aluminum Alloy with an Electroplated Ni–Co–P/Si3N4 Composite Coating

Plasma Spraying NiCoCrAlY-Cr2O3-AgMo Coatings: Fabrication and Tribological Mechanisms

Enhancing tribological performance of graphene sheet-embedded carbon films on steel substrates via texture engineering and chromium doping

Synergistic Effects of Ultrasonic Rolling Textures and PTFE‐PPS/SiO2 Coatings on Dry Friction and Wear Properties of GCr15 Steel Surfaces

Controllable in situ fabrication of self-lubricating nanocomposite coating for light alloys

Development of Tribologically Optimized Surface Coatings with Micro and Nano Particles

FRICTION AND WEAR PROPERTIES OF NANOCOMPOSITE COATINGS INCLUDING INORGANIC FULLERENE-LIKE (mo, W)S2 IN ENVIRONMENTS

Nano-Composite Coatings with Improved Mechanical Properties and Corrosion Resistance by Thermal Spraying

Friction and wear characteristics of in-situ Cr+(Cr,Al)2O3 composite coating fabricated by plasma spraying

Improving the Antifriction Behaviors of Steel by Hybrid Treatments of MoS2 and Surface Texture

Functional Microtextured Superhydrophobic Surface with Excellent Anti-Wear Resistance and Friction Reduction Properties

Fabrication of AlTiN coatings deposited on the ultrasonic rolling textured substrates for improving coatings adhesion strength

Enhancing the Anti-Wear Performance of Graphene Sheets Embedded Carbon Films Through Interface Nanotexture Fabricated on the Substrate

Improving tribological performance of metallic coatings: A synergy of gradient structure and solid lubricant modification

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Tribological Behavior of SNC-MAO Composite Coatings Formed on the Surface of Aluminum Alloys