Abstract:Electroless nickel composite coatings have the potential for high-temperature tribological applications, and a combination of high wear resistance and low friction factor is one of the desirable solutions but still a tricky problem. The addition of self-lubricating WS2 and hard Si3N4 nanoparticles to the Ni-P coatings is expected to obtain good high-temperature tribological performance. In this work, Ni-P-Si3N4-WS2 composite coatings with various contents of WS2 nanoparticles were prepared using electroless plating and subsequently annealed at 400 °C in an inert atmosphere. The tribological properties of the coatings were evaluated using a ball-on-disc wear instrument at operating temperatures from 25 to 600 °C. The microstructure, chemical composition, and surface morphology of the coatings were characterized by X-ray diffractometry (XRD), energy disperse spectroscopy (EDS), and scanning electron microscopy (SEM). Upon increasing the WS2 dosage in the bath, the WS2 content in the coating increased and the micro-hardness of the as-plated coating increased from 539 to 717 HV. After heat treatment, the coating underwent a crystallization process, and the hardness increased from 878 to 1094 HV. The main wear mechanism of the coating changed from adhesive wear in the as-plated state to abrasive wear in the annealed state. The annealed Ni-P-Si3N4-WS2 coating with a WS2 dosage of 2.5 g/L in the bath exhibited excellent mechanical properties, with a hardness of 10.9 GPa, a friction coefficient of ~0.51, and a wear rate of 8.4 × 10−15 m3N−1×m−1 at room temperature, and maintained optimal performance at high temperatures. At operating temperatures of 200, 400, and 600 °C, the form of wear was adhesive wear for coatings with a WS2 dosage < 1.5 g/L and abrasive wear for coatings with a WS2 dosage ≥ 1.5 g/L. The synergism of WS2 and Si3N4 particles refined the grains of the Ni-P matrix in as-plated coatings and obviously reduced the friction coefficient of friction pairs in annealed coatings at all operating temperatures.

FRICTION AND WEAR PROPERTIES OF NANOCOMPOSITE COATINGS INCLUDING INORGANIC FULLERENE-LIKE (mo, W)S2 IN ENVIRONMENTS

Friction and Wear Properties of Electroless Ni-P- (If-Mos2) Composite Coatings in Humid Air and Vacuum

Wear and Friction of Ni-P Electroless Composite Coating Including Inorganic Fullerene-Ws2 Nanoparticles

Preparation and tribological properties of Ni-P electroless composite coating containing inorganic fullerene-like WS2 nanomaterials

Friction and Wear Behavior of Electroless Wear-Resistant and Self-Lubricating Ni-P Composite Coatings

Microstructure, Friction, And Wear Properties Of Ni-Al2o3-Mos2 Composite Coatings

Friction and Wear Properties of Sputtered WS2/Ag Nanocomposite Films in Different Environments

Tribological properties of magnetron sputtered MoS2/metal (Ti, Mo) nanocomposite coatings

Preparation, Mechanical Properties and Wear Resistance of Ni–W/SiC Nanocomposite Coatings

Friction and wear performance of electrospark deposited Ni/C-MoS2 self-lubricating coating

High Temperature Tribological Behavior of Electroless Plating Ni-P-Si3N4-WS2 Composite Coatings

Study on the abrasive resistance of Ni-based coatings containing WC hard phase

Characterization and Wear Behaviors of Electrodeposited Ni-MoS2/SiC Composite Coating

Microstructure and dry sliding wear behavior of MoS2/TiC/Ni composite coatings prepared by laser cladding

Study on the friction and wear properties of nickel-based-WC-10Ni composite coatings prepared on the surface of TC4 titanium alloy

Friction and wear behaviour of composite MoS2–TiO2 coating material in dry sliding contact

Influences of Mwcnts Concentration on the Friction and Anti-Wear Behavior of Ni-P Coating

Friction and wear behavior of Ni-P-carbon nanotubes (CNTs) electroless composite coating

Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF

Tribological behavior of Ni-based composite coatings produced by cold spray