Abstract:Morphing aircraft can change external shape in flight according to different flight environments and tasks, and improve flight performance maximumly. Among them, the morphing wing can improve the aerodynamic performance efficiently and has become one of the hot spots in recent years. One of the key technologies for morphing wing is flexible skin technique. Aiming at the conflict between in-plane deformation and out-of-plane bearing capacity of flexible skin structure design, a zero Poisson's ratio hybrid honeycomb structure was designed. The strips are added to the honeycomb structure to form a hybrid honeycomb, which increases the out-of-plane bending stiffness. Three different shapes of honeycomb grid elements were proposed, which are cruciform, square, and H-shaped. By adjusting the shape and size parameters of the three kinds of honeycomb grid elements and the height and quantity of the laying strips, the in-plane deformation mechanism of each element was analyzed by the representative volume element method, as well as the variation of mechanical properties with the element and strip shape parameters. The mechanical properties of the hybrid honeycomb structure were analyzed by finite element simulation. Considering the requirements of the variable camber trailing edge wing, a flexible skin which has capacity of out-of-plane bending resistance was constituted by covering elastic panel over the surface of zero Poisson's ratio hybrid honeycomb. The flexible skin structure has good airtightness and smooth surface. Also, it meets the requirements of in-plane unidirectional deformation along with out-of-plane bearing capacity.

Zero Poisson’s Ratio Cellular Structure for Two-Dimensional Morphing Applications

3D Zero Poisson’s Ratio Honeycomb Structure for Morphing Wing Applications

Bending and benchmark of zero Poisson’s ratio cellular structures

In-plane Mechanics of a Novel Zero Poisson's Ratio Honeycomb Core

A Kirigami Shape Memory Polymer Honeycomb Concept for Deployment

In-plane Mechanical Properties of a Novel Cellular Structure for Morphing Applications

A novel cellular structure with center-symmetric cell walls for morphing applications

Airfoil Design and Numerical Analysis for Morphing Wing Structure

Cycle deformation behavior of 3D‐printed CF/PEEK honeycomb metamaterials with zero Poisson's ratios

Design and analysis of flexible skin based on zero Poisson's ratio hybrid honeycomb

In-plane Corrugated Cosine Honeycomb for 1D Morphing Skin and Its Application on Variable Camber Wing

Research on Flexible Honeycomb Structure Design for Morphing Aircraft

In-plane elasticity of a novel auxetic honeycomb design

Zero Poisson’s Ratio Honeycomb Structures-An FEA Study

Multi-stiffness topology optimization of zero Poisson's ratio cellular structures

Analyzing In-Plane Mechanics of a Novel Honeycomb Structure with Zero Poisson's Ratio

Mechanical Properties of Re-Entrant Hybrid Honeycomb Structures for Morphing Wings

Nonlinear Mechanics of a Thin-Walled Honeycomb with Zero Poisson’s Ratio

Band Gap Analysis of Star-Shaped Honeycombs with Varied Poisson’s Ratio

Investigation on the mechanical properties of topologically optimized cellular structures for sandwiched morphing skins

Shape memory polymer-based hybrid honeycomb structures with zero Poisson’s ratio and variable stiffness