Abstract:Carbon nanotube (CNT) film can be used as thin film electrodes and wearable electronic devices due to their excellent mechanical and electrical properties. The femtosecond laser has the characteristics of an ultra-short pulse duration and an ultra-high peak power, and it is one of the most suitable methods for film material processing. The ablation and patterning of CNT film are performed by a femtosecond laser with different parameters. An ablation threshold of 25 mJ/cm2 was obtained by investigating the effects of laser pulse energy and pulse number on ablation holes. Raman spectroscopy and scanning electron microscope (SEM) were used to characterize the performance of the pattern groove. The results show that the oligomer in the CNT film was removed by the laser ablation, resulting in an increase in Raman G band intensity. As the laser increased, the ablation of the CNTs was caused by the energy of photons interacting with laser-induced thermal elasticity when the pulse energy was increased enough to destroy the carbon–carbon bonds between different carbon atoms. Impurities and amorphous carbon were found at and near the cut edge while laser cutting at high energy, and considerable distortion and tensile was produced on the edge of the CNTs’ groove. Furthermore, appropriate cutting parameters were obtained without introducing defects and damage to the substrate, which provides a practical method applied to large-area patterning machining of CNT film.

Modification and shaping of carbon nanotubes with an electron beam

Quantitative analysis of electron field-emission characteristics of individual carbon nanotubes: The importance of the tip structure

Shaping Carbon Nanotubes and the Effects on Their Electrical and Mechanical Properties

The Engineering of Hot Carbon Nanotubes with A Focused Electron Beam

Shaping single walled nanotubes

Tailoring Beam Shape Using a Coplanar Quadrupole Focusing Structure in Carbon Nanotube Cold Cathode Electron Gun

Electron Beam Interaction with Carbon Nanotubes in Scanning Electron Microscope: Mechanisms and Applications

Thermally Induced Transfiguration of Polymer Nanowires under Irradiation of Electron Beams

Ablation and Patterning of Carbon Nanotube Film by Femtosecond Laser Irradiation

Manipulation and Cutting of Carbon Nanotubes

Progress on modification of carbon nanotubes

Carbon Nanotubes As Field Emission Sources

Influence of ultraviolet laser irradiation on the morphology change in carbon nanotubes

Nano-welding and Nano-Cutting with an Electron Beam

A Method of Shaping a Carbon Nanotube Pillar Emitter

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Electron microscopy and in situ testing of mechanical deformation of carbon nanotubes.

Electron Beam Irradiation Induced Multi-Walled Carbon Nanotubes Fusion.

Engineering the Cap Structure of Individual Carbon Nanotubes and Corresponding Electron Field Emission Characteristics

Effect of Ion Beam Etching on the Field Emission of Carbon Nanotube Arrays

Nanorobotic manipulation of carbon nanotubes inside a transimission electron microscope