Abstract:Due to the simple design and convenient construction of prestressed concrete box girder bridges, it is widely used in bridge construction in China. At present, the load test of bridge is the most direct and effective method to evaluate the actual bearing capacity of the structure. However, this method has barriers including high cost, long time, and unfriendly to the damaged structure. Besides, the calculation method of the ultimate bearing capacity of damaged structures is relatively subjective and uncertain. Therefore, this study combines the full-size model test results of a newly built 30 m prestressed concrete box girder, and the mechanical properties of the test beam under three different working states (elastic, elastic-plastic, and plastic stage) are obtained. The stiffness degradation and bearing capacity change law of precast prestressed concrete box girder during failure are investigated. Two different stiffness damage reduction coefficients are defined. Combined with the structural characteristics of this kind of precast prestressed concrete box girder and the calculation formula of flexural rigidity of cracked members given by the code, the calculation formula of the actual residual bearing capacity of members is proposed based on the stiffness damage reduction coefficient. The results show that the reduction coefficients of flexural stiffness defined by the two methods have the same variation trend. The stiffness reduction effect of the box girder after damage is evident. The stiffness reduction of the box girder from the cracking damage to the ultimate bearing capacity state is about 40%, and the stiffness reduction of the two adjacent sections can be approximately linear distribution. The deviation between the residual bearing capacity calculated based on the stiffness damage reduction coefficient and the test value is less than 5%. Combined with the distribution law of the stiffness reduction coefficient along the longitudinal section of the box girder, the distribution law of the actual residual bearing capacity along the longitudinal section of the box girder after the damage occurred in the midspan section can be calculated. This calculation method changes the previous assessment method of structural technical condition from qualitative assessment to quantitative assessment, which can be the reference for evaluating the technical condition of damaged bridges and the calculation of residual bearing capacity in engineering.

Effects of Overheight Truck Impacts on Intermediate Diaphragms in Prestressed Concrete Bridge Girders

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Study on the Effect of Middle Diaphragm on Ultimate Loading Capacity of Multi-Box Girder Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

THEORETICAL STUDY ON THE IMPACT FACTOR OF CRESCENT-SHAPED MULTI-RIB CONCRETE FILLED STEEL TUBE TRUSS ARCH BRIDGES

Simulation For The Impact Between Over-High Truck And Steel-Concrete Composite Bridge

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Analysis of Ultimate Loading Capacity of the Prestressed Concrete Curved Bridge

Scaled Model Test for Collision Between Over-Height Truck and Bridge Superstructure

Impact resistance of bridge columns with energy-absorbing crash dampers under vehicle collisions

Experimental Study on the Collision Between Over-height Truck and Main Girder of Concrete T-girder Bridge

Experimental study on protection of prestressed concrete box girder under vehicle explosion of bridge deck

Research on Residual Bearing Capacity Calculation Method and Changing Law of Prestressed Concrete Box Girder with Damage

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Damage Analysis of Box Girder Based on a Vehicle–Bridge Interaction System

Simulation for the impact between truck and composite viaduct

Dynamic Responses of RC Girder Bridge under Heavy Truck and Seismic Loads Combined

Nonlinear Finite Element Simulation For The Impact Between Over-High Truck And Bridge-Superstructure

Theoretical and computational simulation of the effect of the number of intermediate diaphragms on the live load distribution factors and structural response of a precast girder bridge